37NetBotz Appliance User’s Guide
Associating relays or switches with integrated cameras and camera pods. Relays and
switches can be associated with cameras to simplify manually changing relay states from the Camera
View. Once a relay is associated with a camera, the action associated with that relay can be generated
manually by right-clicking on the camera image in the Camera View and selecting the relay output action
from the menu. You can also configure Advanced View to include buttons for relay sensors associated
with the camera. This applies to integrated cameras and cameras connected to the appliance, but not
shared IP cameras.
To associate a relay or switch with a camera, and include buttons in the Camera View for the associated
relays:
1. Double-click the Camera Pods icon.
2. A list of integrated cameras and cameras connected to the appliance appears. Select the camera
you want to configure.
3. Click Settings. Select the Associated Sensors tab.
4. Select one or more relays from Available Sensors to associate with the selected camera. Click ->
(right arrow) to move the selected relays to Selected Sensors. To remove a sensor from the list,
select one or more relays from Selected Sensors, and click <- (left arrow) to move the selected
sensor to Available Sensors.
5. To include buttons for the associated relay actions in the Camera View, check Overlay Buttons
on Camera Image.
6. Select the location in the camera image to place the associated relay action buttons.
7. Click OK.
