807557

Apa 20991 - DP506-150 Manual

11
Zoom out
Zoom in
Previous page
1/28
Next page
11
6.3.2 APPLYING POLISHING AGENT ON THE PAINT
6.3.3 POLISHING THE PAINTWORK
Apply the product only to painted surfaces, never to plastic parts or rubber seals. Using the polishing sponge, dab the
care product onto various spots on the surface to be polished. Adjust the speed to the lowest level using an adjustment
wheel (position 2 in the overview). Hold the device using both the hands. Rest the device with polishing sponge on
the surface to be processed. Switch the device on using the ON/OFF switch (Position 3 in the overview). Pass the device
evenly over the paintwork. Do not put pressure on the device. The work is carried out by the rotation process, not the
pressure on the paintwork.
First treat the large,  at surfaces such as bonnet, root and boot lid. Then move on to smaller areas, such as doors and
wings. For areas that cannot be reached using the polishing machine, remove the polishing sponge and polish by hand.
After you have evenly applied and worked in the care product, it must be removed and the paintwork must be polished.
Depending on manufacturer/type, the applied polishing agent must be completely dry. Now completely remove the
care product by polishing the paintwork in the same order in which you applied the polish. Set a suitable speed for your
care product.
7. MAINTENANCE AND CARE
Clean the polishing machine after each use. Pay particular attention to ensure the ventilations slots are clean To do this,
use a dry, soft cloth. Do not use aggressive cleaning agents or solvents. Never allow liquids to get into the device. You
can use compressed air at a low-pressure to blow-out the device.
The polishing sponge must be washed by hand in warm water. Leave the polishing sponge to air dry.
Store the polishing machine without the polishing sponge. Position the polishing machine in such a way that the
polishing plate is not distorted. Do not place other objects on the polishing plate.
Reset the speed to the lowest level after every disconnection. Avoid accidents during the next restart.
The carbon brushes may be replaced only after the expiry of warranty of an specialist electrical dealer.
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
Do not dispose of electrical devices with the household waste! Electrical and electronic scrap must be
collected separately and disposed of in an environmentally responsible manner for recycling. Please contact
your community or city administration regarding disposal options for electrical and electronic scrap.
9. REPLACEMENT PARTS AND ACCESSORIES
10. CONTACT INFORMATION
Item number 20995 Polishing sponge, solid, 30 mm, Ø 150 mm (replacement for the polishing sponge supplied)
Item number 20996 Polishing sponge, soft, 30 mm, Ø 150 mm
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 20991 - DP506-150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 20991 - DP506-150 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info