807557

Apa 20991 - DP506-150 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
10
Reinsert the Allen screws, image 9, and tighten them.
6.2.3 MOUNTING THE ADDITIONAL HANDLE
Make sure that the mains plug is removed from the socket.
Unscrew an Allen screw at the side of the protective cap (position 5
in the overview) using the Allen key (position 12 in the overview), at
which you want to mount the additional handle (position 10 in the
overview), image 10.
Turn the additional handle in the threaded bush and tighten it, image 11.
Always use clean and undamaged polishing sponge. Dirt or deposits on the polishing sponge can damage
the paint.
6.2.4 MOUNTING THE POLISHING SPONGE
Make sure that the mains plug is removed from the socket.
Place the polishing sponge at the centre of the disc sanding pad using a Velcro loop and push it  rmly with your hand.
Check for correct position by manually turning the disc sanding pad for a few rotations.
6.3 POLISHING
Carefully clean the surface you wish to polish. The surface must be completely dry before polishing. Only
use polishing and waxing products designed for use with polishing machines. Observe the instructions
for the care products being used. Heavily weathered paintwork may require special pre-treatment. For
information, inquire at the specialist dealership.
6.3.1 APPLYING POLISHING AGENT ON THE POLISHING SPONGE
Apply the care product evenly up to the edge of the polishing sponge. A continuous, thin coating must be ensured.
Applying excess care product will not improve the results, it will just make it more di cult to remove.
Polishing too long on the same spot may damage the varnish.
Only polish painted areas. Labels and  lm cannot be polished. If you attempt to polish them, they will be
damaged or destroyed, and may damage the paintwork.
Do not polish the vehicle in full sunlight or in very high temperatures.
Place the protective cap with the D-handle on the polishing machine, image 8.
Push the protective cap  rmly onto the machine.
Figure 8: Position the protective cap
Figure 9: Screw the protective
cap tightly
Figure 10: Remove the Allen screw
Figure 11: Mount the additional handle
Figure 9: Screw the protective
cap tightly
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 20991 - DP506-150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 20991 - DP506-150 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info