Manual Apa 16617 - SPC4DVL (page 10 of 28) (English, German, Dutch, French, Italian)

807563

Zoom out

Zoom in

1/28

6.5.1 SELECTING THE CHARGING PROGRAMME

By pressing the MODE button (multiple times), you can

select the appropriate charging programme for your needs.

The charging programmes appear in the following order

and may be selected by pressing the MODE button:

Motorbike 6 V Motorbike 6 V winter

Motorbike 12 V Motorbike 12 V winter

Car 12 V Car 12 V winter

Depending on the charging state of the battery, the device

adapts the charging current in order to best charge the

connected battery. The specied maximum charging cur-

rent is only used during the main charging phase. Shortly

before the full charging capacity is achieved, the device

switches to a lower charging current. This ensures that the

battery is gently and optimally charged to full capacity.

The battery symbol (Position 7 in the overview) shown on

the display indicates the current lling level of the battery.

Possible charging programmes

Battery maintenance charge mode

As soon as the battery is fully charged, the charger switches automatically over to battery

maintenance charge mode. This is indicated appropriately on the display. Do not leave the

battery charger connected for more than 5 days.

Car winter mode

Charging programme for 12V batteries from 14 Ah to 120 Ah, temperatures below 0°C

Charge current: 4 A maximum

Charge voltage: 14.8 V

Car mode

Charging programme for 12 V batteries from 14 Ah to 120 Ah, temperatures above 0°C

Charge current: 4 A maximum

Charge voltage: 14.6 V

Motorbike winter mode

Charging programme for 12 V batteries from 1.2 Ah to 14 Ah, temperatures below 0°C

Charge current: 2 A maximum

Charge voltage: 14.8 V

Motorbike mode

Charging programme for 12 V batteries from 1.2 Ah to 14 Ah, temperatures above 0°C

Charge current: 2 A maximum

Charge voltage: 14.6 V

6 Volt winter mode

Charging programme for 6 V batteries, 1.2 Ah to 14 Ah, temperature below 0°C

Charge current: 2 A maximum

Charge voltage: 7.4 V

6 Volt mode

Charging programme for 6 V batteries, 1.2 Ah to 14 Ah, temperatures above 0°C

Charge current: 2 A maximum

Charge voltage: 7.2 V

After plugging the mains cable inselect the

desired charging pro- gramme by operating

the MODE button multiple times. If the MODE

button is not pressed, the charging process is

not started. When charging has started it is no

longer possible to switch to another charging

program, If you wish to work with a program

CAUTION

6.5 CHARGING THE BATTERY

Connect the adapter charging cable to the charging cable

(Position D in the overview) of the battery charger. Now

connect the mains connection cable (Position A in the

overview) of the battery charger to the power socket. The

background illumination of the display is activated.

If the battery has been connected incorrectly (wrong poles)

or the charger has no contact, the following error message

appears on the display ˝Er1˝. If the error message ˝Er2˝ is

shown, a defective 6 V battery has been connected, this

cannot be charged using the battery charger. If the battery

has been correctly connected, the display shows the current

battery voltage and the symbol for the set charging pro-

gramme.

other than the set charging program, pull the

plug out of the socket and wait until the display

has gone dark. Then insert the plug again and

proceed as described above.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16617 - SPC4DVL in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Apa 16617 - SPC4DVL Manual

Product: