807563

Apa 16617 - SPC4DVL Manual

9
Zoom out
Zoom in
Previous page
1/28
Next page
9
1. Battery voltage display
2. 6 V charging programme
3. Winter charging programme
4. 12 V charging programme
5. Car charging programme
6. Motorbike charging programme
7. Battery charge status display
6.2 USING THE ADAPTER CHARGING CABLE
The adapter charging cable with pole callipers (Position F in
the overview) is used if you wish to connect the charger in
the classic way to the poles of the battery. The adapter char-
ging cable with eyes (Position E in the overview) is designed
to remain rmly attached to a battery which is dicult to
access. The charger can be conveniently connected using
the adapter.
Figure 2: Display
6. OPERATING INSTRUCTIONS
Before using the device make sure that you have
read the operating instructions for the battery
and the vehicle and you have understood all of
the safety precautions.
6.1 OVERVIEW
A Mains cable
B Mode button
C Display
D Charging cable
E Adapter harging cable with eyes
F Adapter charging cable with pole callipers
Figure 1: Overview
6.3 PREPARATION
Clean the battery poles to remove dust and corrosion
residue.
Only for open batteries: Remove the plugs of the battery
cells. Check the liquid level in the cells, consult the operating
instructions of your battery for more information. Replenish
only sucient distilled water to ensure that the minimum
lling level is achieved. The liquid will expand during the
charging process and the battery may overow. Leave
the cells of the battery open until the end of the charging
process.
In the event of closed and maintenance-free batteries,
please follow the instructions of the battery manufacturer
to the letter.
6.4 CONNECTING THE BATTERY CHARGER
6.4.1 CONNECTING THE ADAPTER CHARGING CABLE
WITH POLE CALLIPERS
Make sure that the charger is not connected to
the power socket and that the adapter charging
cable is not connected to the battery charger.
Make sure that the charger is not connected to
the power socket and that the adapter charging
cable is not connected to the battery charger.
Always connect the red plus cable (+) to the positive pole
of the battery rst. Subsequently, connect the black minus
cable (-) to the negative pole of the battery. If you charge
the battery in situ, connect the black negative cable (-) to
the car body (exposed part), far away from the battery, the
carburettor and fuel lines. Always maintain this sequence.
6.4.2 CONNECTING THE ADAPTER CHARGING CABLE
WITH EYES
Attach the eye of the red plus cable to the plus connection
cable of your vehicle battery, e.g. the screws of the pole ter-
minal. Attach the eye of the black minus cable to the earth
connection cable (minus cable) of your battery. Lay the ca-
ble so that it is free from bends and tensions. It may not be
attached in the vicinity of hot or rotating parts of the motor.
The connection plug may not get wet.
CAUTION
CAUTION
When using the adapter charging cable with the
ring eyes, switch all consumers in the vehicle o
before starting the charging process. Never leave
the charging process unattended.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 16617 - SPC4DVL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16617 - SPC4DVL in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info