807554

Apa 16540 - SH317 Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
12
Lock the
valve connector
You can now start
to in ate the tyre
Fig. 4 Fig. 5
To in ate, switch the compressor on with the on-o
switch.
The manometer (position 9 in the overview) is used for
the general inspection of the air pressure. Once you
have reached the desired air pressure, switch o the
compressor. Remove the valve connector in reverse order
( gures 5 – 2).
Öffnen Sie die
Verriegelung
am Ventilanschluß
Setzen Sie den
Ventilanschluß auf
das Ventil
Verriegeln Sie den
Ventilanschluß
Sie können jetzt
den Reifen mit dem
Kompressor
befüllen
During the  lling process, always ensure
that the air pressure is correct (refer to the
operating instruction of your vehicle for this).
The compressor can provide a pressure of up
to 18 bar. There is a risk of explosion and injury
if the pressure is too high.
Never let the compressor work longer than
10 minutes at a time as there is a risk of
overheating. Switch the compressor o after
10 minutes and let if cool o before you put it
back into operation.
Never let the compressor run unsupervised.
After  lling a tyre, check the tyre pressure one more time
with a separate air pressure gauge (e.g. at the petrol
station, car workshop).
6.4.2 USE OF THE INCLUDED VALVE ADAPTERS
Fig. 6: Valve adapter
A Bicycle valve adapter
(for Dunlop and Sclaverand valves)
B Adapter for balls
C Universal adapter for leisure articles
(in atable pool toys, etc.)
A Bicycle valve adapter
(for Dunlop and Sclaverand valves):
For Sclaverand valves: Unscrew the knurled screw of the
valve tappet and press it brie y down once.
Screw the valve adapter with the knurled rim down onto
to bicycle valve.
Now connect the air hose to the bicycle valve adapter as
shown on  gures 2 – 5. Now you can  ll the bicycle tyres
by switching on the compressor. Once you have reached
the desired air pressure, switch o the compressor. Re-
move the valve connector in reverse order ( gures 5 – 2).
Unscrew the bicycle valve adapter from the bicycle valve.
Für Sclaverandventile: Retighten the knurled screw of the
valve tappet.
B Adapter for balls
Open the lock of the valve connection ( gure 2). Place the
adapter for balls in the valve connection. Lock the valve
connection ( gure 3). Place the adapter into the valve of
the balls. Now you can in ate the ball by switching on
the compressor. Once you have reached the desired air
pressure, switch o the compressor. Remove the adapter
from the valve connection by proceeding as described
above in reverse order.
Store the power pack at room temperature. If the power
pack is not used for longer periods of time, recharge it in
the winter every two months and once a month in the
summer.
Changing the fuse on the 12 V car charger cable:
Turn the knurled screw at the tip of the 12V plug
counter clockwise until it is disconnected from the plug and
remove it. The fuse is released and can be pulled out from
the plug. Replace it with a new fuse of the same strength
and screw the knurled screw back into the plug.
Fuse 6.0 x 30 mm, F, 2 A, 250 V
C Universal adapter for leisure articles
Open the lock of the valve connection ( gure 2). Place
the universal adapter in the valve connection. Lock the
valve connection ( gure 3). Place the universal adapter in
the  lling point of your leisure article. Depending on the
mode, the universal adapter may have to be held while
you are in ating the object. Now you can start in ating
by switching on the compressor. Once you have reached
the desired air pressure, switch o the compressor. Remo-
ve the adapter from the valve connection by proceeding
as described above in reverse order.
7. CARE AND MAINTENANCE
7.1 MAINTENANCE
(Position 14 in the overview)
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 16540 - SH317 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16540 - SH317 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info