807560
11
Zoom out
Zoom in
Previous page
1/24
Next page
11
6.5 USING THE LED LIGHT / SIGNAL LAMP
To switch on the LED lamp continuously (Position 5 in the
overview), keep the switch (Position 1 in the overview) of
the Powerpack pressed for approx. 3 seconds. Then, you
can switch the following light functions one after anoth-
er by pressing the switch again: fast ashing – SOS – OFF.
6.4.1 POSSIBLE ERRORS DURING JUMP START
The control lamp of the Smartbox does not shine green
permanently:
The terminal clamps have no contact or poor
contact to the battery callipers
Clean the battery poles and reattach the terminal
clamps
The battery of the Powerpack is not adequately
charged
Charge the battery
The current required for the jump start exceeds the
possibilities of the Powerpack
Use a Powerpack with greater performance
If your USB device has a USB-C port, you can use the
supplied USB-C cable for charging. For other ports, use a
cable suitable for your device. These instructions describe
how to use the supplied USB-C charging cable. Insert
the USB-A plug into the USB output (position 4 in the
overview) of the Powerpack. The USB-C plug, connect
to your USB device. Press the switch (position 1 in the
overview) of the Powerpack to start the charging process.
The display shows the charging voltage (position 14 in
the overview) and the charging current (position 15 in
the overview).
After charging, rst disconnect the charging cable from
the Powerpack, then remove the charging cable from
your USB device.
6.6 CHARGING USB DEVICES
7.2 STORAGE
When it is not in use, the Powerpack should be stored in
a dry place. Do not expose the Powerpack to moisture,
oil, dust, dirt, high temperatures, excessive vibrations or
mechanical stresses. Always disconnect the jump lead
from the Powerpack before storage to ensure that no
short circuits can occur between the terminal clamps.
7. CLEANING, STORAGE AND MAINTENANCE
7.1 CLEANING
Only clean the Powerpack with a soft cloth and do not use
any aggressive cleaning agents or solvents. Never allow
liquids to ingress into the housing.
7.3 MAINTENANCE
When the Powerpack is not in use, recharge it once it
reaches a battery capacity of 25%.
8. NOTES REGARDING ENVIRONMENTAL
PROTECTION
The packaging is made up of environmental-
ly friendly materials which may be disposed
of via your local recycling points. Do not put
electrical devices into the household waste.
Electronic and electrical devices must be
collected separately and sent for environmen-
tally friendly recycling. Contact your commu-
nity or town administration for information
regarding the disposal of electrics.
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 16443 Power Pack at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16443 Power Pack in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info