801483

ANT MIM 30 Manual

6
Zoom out
Zoom in
Previous page
1/21
Next page
ENGLISH
MiM Series | User manual
10
11
Series
User manual | MiM Series
press again ESC (MiM 30R) or SET (MiM 20R) to exit the menu.
Simultaneously using more systems, it’s better to have them on the same group
but on different channels.
If the transmitter is in Mono mode, using the up/down buttons you set the position
of the signal in the Stereo eld.
4 TONE SELECTION (MiM 30R only)
Press the SET button for 2 seconds to access the settings menu, then press again
SET until when “TONE” starts flashing in the display. Use the up and down buttons
to activate (ON) or deactivate (OFF) TONE feature.
TONE ON boosts high frequencies.
5 LIMITER SELECTION (MiM 30R only)
Press the SET button for 2 seconds to access the settings menu, then press again
SET until when “LIMITER” starts flashing in the display. Use the up and down buttons
to activate (ON) or deactivate (OFF) LIMITER feature. LIMITER ON reduces sudden
peaks, thus protecting your hearing.
6 LOCK (MiM 30R only)
Press the SET button for 2 seconds to access the settings menu, then press again
SET until when the lock icon starts flashing. Use the up and down buttons to activate
(ON) or deactivate (OFF) the lock.
ATTENTION: when LOCK icon is displayed, you can see the unit settings, which
are not editable.
7 MIX (MiM 30R only)
Press the SET button for 2 seconds to access the settings menu, then press again
SET until when “MIX” starts flashing in the display. Use the up and down buttons to
activate (ON) or deactivate (OFF) MIX feature.
MIX ON allows to listen both transmitter input signals - AF1 and AF2 - using the
supplied earphones.
To balance the signal between AF1 and AF2 inputs, press the up and down buttons.
You can choose among 31 available positions:
In MIX -0- position, AF1 and AF2 input signals are balanced.
Press the (button arrow up) to increase AF1 signal versus AF2 signal:
1-, 2-, 3-, 4-, 5-, 6-, 7-,8-, 9-, A-, b-, C-, d-, E-, and F- (max)
Press the (button arrow down) to increase AF2 signal versus AF1 signal:
-1, -2, -3, -4, -5, -6, -7, -8, -9, -A, -b, -C, -d, -E, and -F (max)
8 BATTERIES LEVEL INDICATOR
This icon displays in 4 steps the battery charge level. When inside the icon there’s no
bars present and LOW BATT LED flashes, please immediately replace the batteries.
4 | TROUBLESHOOTING
PROBLEM LEDS SOLUTION
No sound or very
low sound level.
Power LED
turned off.
Make sure the batteries are not discharged
and that the receiver is turned on.
Transmitter LCD turned off.
Check the connection between power
supply and the transmitter.
Turn on the transmitter.
Receiver RF indicator is off.
Make sure that transmitter and receiver are
set to the same frequency.
Reduce the distance between transmitter
and receiver, and verify that the two devices
are in direct visual contact.
Make sure that the transmitter antenna is
mounted correctly.
Receiver turned on
and RF light on.
Raise the volume of the receiver and check
earphones connection.
Check the input level of the transmitter and,
possibly, increase it.
Distortions or unwanted
interferences.
Receiver RF
antenna lit.
Increase the distance from possible causes
of interference (digital control devices, such
as CD player, console ...).
Use a different frequency.
Distorted sound.
Receiver LOW
BATT LED
flashes.
Too high level
indicator of the
transmitter.
Replace the batteries.
Turn down the volume control of the
transmitter or the volume of the source
device.
Listening to a Mono signal only
from one hearphones side.
Transmitter is
in Stereo
mode.
Set the transmitter in Mono mode.
Mode Stereo and MIX activated:
you want to hear only the right
input signal transmitter, even if
the transmitter is in Stereo mode
and both the transmitter inputs
are used. (MiM 30 only).
Transmitter is
in Mono mode. Set the transmitter in Stereo mode.
Listening to two independent
mono signals in left and right
earphones, but you want to hear
the signals in both earphones
(MiM 30 only).
Activate MIX in the transmitter.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT MIM 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT MIM 30 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 4.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info