801472

ANT Asm series Manual

5
Zoom out
Zoom in
Previous page
1/29
Next page
ENGLISH
ASM Series | User manual
8
9
User manual | ASM Series
3.2 | POWER SUPPLY
1 AC VOLTAGE SELECTOR
Operating voltage selector. Generally it is not necessary to act on this command
since it is set at the factory.
WARNING! Before switching on the unit, make sure that the mains voltage and
that of the device match.
2 POWER ON/OFF
Use this switch to turn ON/OFF the system.
NOTE: For proper operation always switch on the system last and switch it off rst.
Before turning on the system, make sure the LEVEL knob is at minimum.
3 FUSE
Protection fuse.
CAUTION: Replace the fuse only with one of the same type and with the same
values. If the fuse blows repeatedly, contact an authorized service center.
4 MAINS INPUT
IEC mains socket with integrated EMI lter. Each package is supplied with the
necessary power cord, specic for your area. Insert the mains cable into this
socket, but make sure the unit is switched off before connecting the cable to the
mains. For your safety, never disconnect the ground lead..
CAUTION: To reduce the risk of electric shock, never connect the power supply
to the appliance while the grille is removed.
1
2
3
4
4 | TROUBLESHOOTING
PROBLEM LED SOLUTION
No sound Power LED turned
off.
Make sure the system is properly
connected to the mains outlet.
Make sure that mains plug is rmly
inserted into the socket.
very low sound level
Power LED turned
on, but low MAIN
LEVEL.
Turn the MAIN LEVEL knob
clockwise.
Make sure the SIG LED is on.
Check the signal cable.
Distortion SIG/CLIP LED
lit red
Lower the level of LEVEL knob or
input sources. When using input line
signals, make sure that the LINE /
MIC button is not pressed in the MIC
position.
ON/LIMIT LED lit
green Check the source level.
Booming sound
Put the selector in
LIVE MONITOR position
Check source signal.
Harsh sound
Put the selector in
PLAYBACK position
Check source signal.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT Asm series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT Asm series in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info