801472
3
Zoom out
Zoom in
Previous page
1/29
Next page
ENGLISH
ASM Series | User manual
4
5
User manual | ASM Series
2 | INSTALLATION
Each speaker is equipped with:
A | Recessed side handles
B | Ø 35mm. flange for pole mounting
C | Non-slip rubber feet
D | Front metal protection grille
.
For speaker installation and to guarantee its correct performance, strictly follow the
instructions below:
Place the speaker in a horizontal position on a flat and stable surface, making sure
that all the lower rubber feet are perfectly adhering to the floor or to the supporting
surface. The speaker is designed for use on the floor (wedge monitor conguration).
Never install the speaker on mobile carts, chairs, tables or similar objects that are
not stable or unable to withstand the weight.
To allow for proper heat dissipation of the amplication, leave sufcient distance
between the rear panel of the speaker and other objects such as walls, corners, curtains,
and never place the appliance near sources of heat of any kind.
When used outdoors, avoid places exposed to bad weather.
CAUTION: Install the speaker in a stable and safe way, so as to avoid any dangerous
condition for the safety of people and structures.
A A
C
CB
D
3 | DESCRIPTION
3.1 | INPUTS & CONTROLS
1 LINE INPUT L/R
Balanced line level inputs, with COMBO (XLR-F + 6,35mm. socket)
connectors. You can also use an unbalanced mic cable. The inputs level
is adjusted by LEVEL knob.
NOTE: Please try to always use balanced cables.
2 LINE / MIC BUTTON
Place the button on LINE (up) to use a line level source (mixer and pre-
amplied devices) or MIC (pressed) for using a microphone. To lower
or raise it, use a screwdriver with a small flat head.
3 LINK OUT
Link output of input signal on XLR-M plug. The signal of this output
depends on the setting of the LEVEL knob.
4 LIVE MONITOR / PLAYBACK BUTTON
Press this button to select the optimal equalization for using the speaker.
It is possible to select the equalization setting between two different
presets:
3
4
2
1
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT Asm series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT Asm series in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info