801478

ANT ANTMIX series Manual

4
Zoom out
Zoom in
Previous page
1/57
Next page
3
4
1
2
6
7
8
5
14
15
16
17
ENGLISH
ANTMIX Series | User manual
6
7
SERIES
User manual | ANTMIX Series
indicates the activation of the command.
14 PEAK
This LED is lit when the input signal is very loud and is close
to distortion.
When the LED is continuously lit, please lower the input gain
or adjust channel EQ, so reducing the boost introduced by HI,
MID, and LOW gains.
15 GR 1-2 - 12FX ONLY
Press this button to route the channel signal to GROUP OUT
1-2 outputs.
16 L-R - 12FX ONLY
Press this button to route the channel signal to MAIN MIX L-R
outputs.
17 LEVEL
Use this knob (6FX) or this fader (8FX & 12FX) to adjust channel
volume.
3 GAIN - 6FX (IN 1-2) 8FX (IN 1-4) E 12FX (IN
1-6)
This knob adjusts the gain of the microphone or line
signal, turn it to the right to raise the gain, or to the
left to decrease it.
4 LOW CUT - 8FX (IN 1-4) AND 12FX (IN 1-6)
This switch activates the hi-pass lter to reduce the
frequencies from 75Hz down.
Use it to avoid that microphones connected to the
input channels will pick up unwanted signals rich
of low frequencies.
5 EQ
Use this three-band equalizer to boost or to cut HI,
MID, LOW frequencies to get the best mix in any
environment.
6 AUX - 12FX ONLY
This knob adjusts the signal sent to AUX SEND.
Use it to connect the mixer to an additional effects
unit or to stage monitors.
7 PRE/POST - 12FX ONLY
This selector determines whether the AUX send level
is independent (PRE) or is influenced (POST) by the
channel level control.
Generally it is used PRE to send the signal to stage
monitors or IEM, POST to send the signal to an
external effect unit.
8 DFX POST
This send, influenced by the individual channel
level control, adjusts the signal sent to the internal
effects or to an external effects connected to DFX
1 MIC INPUT
XLR-F balanced microphone input.
2 LINE L (MONO) & R INPUT
Two 6.35 mm. (1/4”) balanced line input.
Connecting only one cable to L/MONO, it becomes a mono
channel. You can also use an unbalanced cable.
3.1.2 | MONO/STEREO INPUTS
INPUTS 3/4 & 5/6 (8FX) AND 5/6 & 7/8 (12FX)
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT ANTMIX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT ANTMIX series in the language / languages: English, German, Italian as an attachment in your email.

The manual is 8.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info