801478

ANT ANTMIX series Manual

3
Zoom out
Zoom in
Previous page
1/57
Next page
1
2
3
4
5
6
11
12
13
8
9
10
7
ENGLISH
ANTMIX Series | User manual
4
5
SERIES
User manual | ANTMIX Series
3 | DESCRIPTION
3.1 | MIXER CONTROLS & CONNECTIONS
3.1.1 | MONO INPUTS
1 MIC INPUT
XLR-F balanced microphone input.
2 LINE INPUT
6.35 mm. (1/4”) balanced line input. You may also use an
unbalanced cable.
3 INSERT - ONLY IN 8FX (IN 1-2) AND 12FX (IN 1-4)
MODELS
6.35 mm. (1/4”) TRS socket. This socket allows you to connect
external devices (e. g. a compressor, an EQ, etc.) to process the
signal. For this connection use a "Y" cable, plugging to this socket
a TRS connector (tip = send, ring = return, and sleeve = ground)
then connect the external device with two TS connectors, one
for input and one for the output.
4 GAIN - 6FX (IN 1-2) 8FX (IN 1-4) E 12FX (IN 1-6)
This knob adjusts the gain of the microphone or line signal,
turn it to the right to raise the level, or to the left to decrease it.
5 LOW CUT - 8FX (IN 1-4) E 12FX (IN 1-6)
This switch activates the hi-pass lter to reduce the frequencies
from 75Hz down.
Use it to avoid that microphones connected to the input channels
will pick up unwanted signals rich of low frequencies.
6 COMP - 8FX (IN 1-2) E 12FX (IN 1-4)
This knob simultaneously adjusts compression threshold and
ratio.
Turning the knob hard left, the compressor is turned off, turning
to the right you activate it, until the maximum compression to
+ 10. Use this control, for example, to make voices levels more
homogeneous.
7 EQ - 6FX (IN 1-2) 8FX (IN 1-4) E 12FX (IN 1-6)
Use this three-band equalizer to boost or to cut the
HI, MID, LOW frequencies to get the best mix in any
environment.
8 AUX - 12FX ONLY
This knob adjusts the signal sent to AUX SEND.
Use it to connect the mixer to an additional effects
unit or to stage monitors.
9 PRE/POST - 12FX ONLY
This selector determines whether the AUX send level
is independent (PRE) or is influenced (POST) by the
channel level control.
Generally it is used PRE to send the signal to stage
monitors or IEM, POST to send the signal to an
external effect unit.
10 DFX POST
This send, influenced by the individual channel
level control, adjusts the signal sent to the internal
effects or to an external effects connected to DFX
SEND output.
11 PAN
This knob adjusts the signal position in the stereo
eld.
12 MUTE & LED - 12FX ONLY
Press this button to mute the selected channel
source.
The lit LED indicates the MUTE activation.
13 PFL & LED - 12FX ONLY
Press this button to check channel signal level
before the fader.
It works also when the channel is muted; the led
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT ANTMIX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT ANTMIX series in the language / languages: English, German, Italian as an attachment in your email.

The manual is 8.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info