541684
10
Zoom out
Zoom in
Previous page
1/29
Next page
Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: GT-2
10
VT3:
The hight of the side and frontboard is 135 cm. The tailboard is one complete board which opens
from below. The length of this board is ca. 135 cm. In combination with the hard top which opens
at the frontside the internal hight is 153 cm. The hard top can remain open with a shock
absorber.You can load the trailer very easy
When opening and closing the boards, ensure that persons present near the boards are not
exposed to danger, or risk getting entrapped, or injured in any other manner whatsoever.
The hard top cover is equipped with a shock absorber. ATTENTION: By the mechanicem
the hard top cover must be pulled “over the zero point”. The pressure of the shock absorber is determed by a “empty” hard cover.
When there is a loading on the hard cover, the shock absorber can function less. (hard cover remains open) The shock absorber in a
closed condition gives also more closing power. While opening the tailboards on public roads, the applicable laws should be duly followed. If
the applicable laws require this, use the pull-out beams present in the trailer. When the tailboard is resting on the pull-out beams, the lighting
fittings remain visible.
When the trailer is equipped with dismountable hinge pins below the tailgate, you can move the hinge pins to the side after removing the hairpin
springs. The tailgate is now dismountable. In this situation also the lighting fittings remain visible. ATTENTION: Ensure that you are visible during
loading/unloading on public roads. This is for your safety and that of other road users.
NEVER drive with the boards or hard top open
Ensure regular lubrication of the lock mechanism. This can be done from the top using a Teflon or silicone spray.
3. Mounting the mudgards
For logistique raisons your trailer is being deliverd without mudgards from the factory. In many cases your dealer has already mounted the mudgards
as descriped below. When not you can do it yourself with the fixationmaterials before you go into public roads with your trailer. The holes in the
sideboard are already there so it is not necessary to bore. The example below shows a mudgards from a single axle trailer. For a double axle you can
follow the same instructions.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Anssems GT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Anssems GT in the language / languages: English as an attachment in your email.

The manual is 6,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Anssems GT

Anssems GT User Manual - German - 28 pages

Anssems GT User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info