The cargo should be properly secured in place. This is to prevent loss and shifting of the cargo during motion. The shifting of the cargo may lead
to a sudden change in the handling characteristics of the vehicles.
•Furthermore, while loading the vehicle on public roads, follow all the applicable regulations (among others, the visibility of the lighting and
maximum length of projecting cargo).
•Check whether it is permissible to drive with the trailer.
•Does the towing vehicle allow driving with the trailer?
•Is the combination in accordance with your Driving Licence?
•
It is preferable to load and unload your trailer in the coupled condition. If this is not done, check whether the trailer may "topple" (the jockey wheel
lifts off the ground) during loading or unloading.
•Follow the applicable laws concerning what the load may consist of (such as hazardous substances and persons).
•
While loading the trailer, keep in mind the net loading capacity of the axle(s) and the coupling. Distribute the loading in such a manner over the
loading floor that the correct coupling pressure is achieved. This coupling pressure should never exceed the maximum permissible level, and
should also be in accordance with the possible coupling pressure for the towing vehicle. For the correct information, please contact your (towing)
vehicle supplier, or check the user manual of the towing vehicle.
•
ATTENTION: The coupling pressure should never be negative (this would mean that the coupling is pulling vertically on the towing
hook ball of the towing vehicle). For the minimum coupling pressure, duly follow the applicable laws and regulations.
•
ATTENTION: Your trailer is designed, calculated and tested (through a life test) for the loads as mentioned in the documents
relating to your trailer, and for the maximum speed applicable on public roads for a towing vehicle with trailer. The permissible
loads may be found on the construction plate (or the type plate) installed on the trailer. Overloading may lead to permanent
damage to some components. We accept no liability for the same as manufacturers.
2.10 Van Trailer / HT- en VT-versions
We can deliver the GT-trailer also as a van trailer. Below you can see the different versions.
HT:
The standard trailer is equipped with a hard top which opens at the frontside. The internal hight is
now 48 cm. The hard top can remain open with a shock absorber.You can load the trailer very easy.
VT1:
The hight of the side and frontboard is 65 cm. The tailboard is similar to the tailboard of the
standard open version. A remouvable tailboard is extra. The internal hight is now 83 cm. The hard
top can remain open with a shock absorber.You can load the trailer very easy
VT2:
The hight of the side and frontboard is 100 cm. The tailboard is one complete board which opens
from below. The length of this board is ca. 100 cm. In combination with the hard top which opens at
the frontside the internal hight is 118 cm. The hard top can remain open with a shock absorber.You
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Anssems GT at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Anssems GT in the language / languages: English as an attachment in your email.
The manual is 6,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
