•It is most important that the wheel and hub/brake drum are dimensionally compatible. This means that the P.C.D., wheel bolts and inset must all
be compatible with both the hub/brake drum and the wheel rim. Particular attention must be paid to the recommended torque figures for the
wheels bolts.
Operation Instructions:
Function:
Service brake:
When the towing vehicle is braking or travelling down hill the overrun device shaft is pushed in (dependent on the magnitude of the thrust on the shaft)
and presses on the overrun lever. This acts on the bowden cables an expander mechanism which in turn expands the brake shoes applying the wheel
brakes.
Reversing:
When the towing vehicle is reversing, the overrun device shaft is pushed in, applying the brakes via the overrun lever, brake rod system, bowden
cables and the expander mechanism. The backwards rotation of the brake drum causes the secondary brake shoe to collapse cancelling out the
braking effect allowing the trailer to move backwards. At the same time the transmission lever swings back and compensates for the entire travel
Parking Brake:
With the gas strut version pull the hand-brake lever over top dead centre. With the spring cylinder version pull the hand-brake lever right up to the last
tooth. The trailer is then braked.
Important note: Please note that with the handbrake fully applied the trailer is able to move backwards by 25cms until the spring cylinder/gas spring
takes effect.
Maintenance and cleaning:
Braked axle:
The axels comes fitted with maintenance tree wheel bearings (greased and seled for life) and no adjustment is necessary. The hub bearing is not
protected against water ingress.
Check wheel brake linings for wear every 10 000 kilometres or every 12 months via the inspection hole (Fig.2/1) Adjust if necessary. Where continuous
travel in hilly regions or high mileage is experienced earlier inspection and adjustment may be necessary.
Unbraked axle:
After 1500 km or 6 months;
Have the axial play of the hub bearing checked an adjusted, if necessary.
Caution: All necessary service work should only be carried out by trained personnel in specialist workshops
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Anssems GT at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Anssems GT in the language / languages: English as an attachment in your email.
The manual is 6,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
