738524

Ansmann FM2.0 Manual

17
Zoom out
Zoom in
Previous page
1/36
Next page
support stops.
The level of the desired motor support can be preselected before starting
the ride. There are 6 levels of motor support which can be selected at the
display by pushing the + and – button.
Level 1 approx. 15km/h LED LOW flashes
Level 2 approx. 17km/h LED LOW is on
Level 3 approx. 19km/h LED MED flashes
Level 4 approx. 21km/h LED MED is on
Level 5 approx. 23km/h LED HIGH flashes
Level 6 approx. 25km/h LED HIGH is on
The motor support at these levels is only available whilst pedalling. As soon
as pedalling stops, the motor support stops. The motor will start again
automatically when pedalling commences.
The quoted speeds are based on riding on a flat level surface. When
pedalling faster the motor support will be reduced. To achieve the listed
velocities when riding uphill more energy has to be expended.
When the brake levers included are activated the motor support stops im-
mediately. When other brake levers are used the motor support only begins
to stop when pedalling is halted.
Your EPAC-Bike can be used as a normal bicycle anytime (without motor
support). The motor is equipped with a free wheel (no expenditure energy is
necessary when pedalling).
When using just a bicycle it is not necessary to carry the accumulator/
battery or to switch it on. If you want to switch off the motor support while
riding, press the – button several times (until all of the 3 lights are off).
When the main switched is turned on the motor support can be activated
anytime by pushing the + button.
Use the included charger to recharge the accumulator/battery pack. First
remove the rubber seal cap from the charging plug. Connect the charger
with the charging plug. Charging begins as soon as the charger is connec-
ted with the power outlet. The charger is automatically reducing the charge
rate after it is completely charged. As soon as the red light turns to green
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ansmann FM2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ansmann FM2.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info