517488
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
CENTRE THE BRAKING SHOE
The centre screw is for fine adjustment. Read just the braking shoe distance by using
the wire setting screw.
V-BRAKE
1. Push the braking block against the rim and tighten the brake shoe fixing screw.
2. Pull the wire through the cable casing.
3. Set the distance between the brake shoe at the left and the right side to 2mm. Fix
the wire fixing screw.
4. Before using the brake, pull the brake lever to the handlebar approx. 10 times and
check that it is working properly.
CHANGE BRAKE PADS
1. Remove the locking pin from the brake shoe
2. Push the brake pad out of the brake shoe.
3. Make sure that different brake pads are used on the left and the right side
4. Push the new brake pad into the brake shoe mounting and pay attention that the
direction and the holes for the locking pins are correct.
5. It is important to insert the locking pin to fix the brake pads correctly
DISC BRAKES
Bicycles with disc brakes are delivered with a separate manufacturer’s manual for the
brakes. Please read this manual and adhere to its recommendations.
Disc brakes achieve their full potential after approx. 30-100 braking processes, the
same as with motorised vehicles.
A
R55C2
R
FORWARD
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ansmann eBIKe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ansmann eBIKe in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ansmann eBIKe

Ansmann eBIKe User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info