706166
3
Zoom out
Zoom in
Previous page
1/9
Next page
3
If you find that it is not, your WAN connection is not operating properly. Please
check the WAN light (1st on the right) on the router. If it is off, please confirm that
the WAN cable is securely connected and that the modem is working. If you are still
unable to connect, your router may be experiencing an IP conflict with the existing
modem. Please refer to FAQ Question 6 for further troubleshooting.
Connect the Anker router to your computer (see Step 2), and disconnect your
router from the modem.
Logon to the Anker routers configuration page by typing 192.168.0.1 in your
web browser.
Go to the Advanced settings page, and click Network > LAN.
Enter “192.168.1.1to reassign this as the new IP Address for your Anker router.
Click Save, then OK to confirm.
Click Reboot Now and wait about 40 seconds until you are redirected to the new
configuration page at the new IP address http://192.168.1.1.
Reconnect your Anker router to the modem with a cable. Wait 20 seconds and
check your WAN status again. You may need to restart your modem for changes
to take effect.
6. How do I resolve IP subnet conflicts between the Anker router and other
devices with routing functions (such as routers, modems, etc)?
Some routers, residential gateways, and modems with built-in routing functions
use the same Anker N600 router 192.168.0.1 address as their default IP address. The
IP address conflict will result in a failure of the Anker routers WAN connection, and
therefore prevent Internet access.
To resolve this conflict, please assign the Anker router a new IP address of
192.168.1.1 to prevent further network conflicts. Directions are listed below:
A.
B.
C.
D.
E.
F.
G.
Note: Moving forward, please remember to visit“192.168.1.1”instead of
“192.168.0.1”to access the Anker routers configuration page.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Anker N600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Anker N600 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Anker N600

Anker N600 Additional guide - English - 12 pages

Anker N600 Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info