These warranty conditions are only valid for the following countries: Austria, Germany and Switzerland. Separate conditions imposed by the importer apply for all
other countries. In case of doubt as well as missing or incorrect translations, the German version is the only valid one.
For the purpose of timely damage limitation the claimant is required to le the warranty claim with the RIKA dealer in writing, submitting the invoice and stating
the purchase date, model name, serial number and reason for complaint.
Warranty
5 years on the welded stove body. This exclusively applies to defects in materials and workmanship as well as free replacement. Labour and travel times are not
included in the manufacturer’s warranty.
Only original parts supplied by the manufacturer should be used. Loss of warranty on non-observance!
The precondition for the warranty is that the stove has been installed and commissioned properly according to the User and installation manuals valid at the time of
purchase. Connection must be performed by a specialist for such stoves.
Any costs incurred by the manufacturer due to unjustied warranty claims are to be charged to the claimant.
Wear parts and parts aected by re are excluded, such as glass, coating, surface coatings (e.g. handles, panels), seals, re trough, grates, draught plates,
Also excluded from this warranty are all damages arising from non-observance of the manufacturer’s operating instructions of the unit, or damage caused by
overheating, use of nonapproved fuels, unauthorised tampering with the appliance or the ue gas pipe, electrical excess voltage, an incorrect, insucient or
excessive ue draught, condensation, non-performance or decient maintenance and cleaning, nonobservance of the relevant and applicable building regulations,
incorrect operation by the user or third parties, as well as any transport and handling damage.
This manufacturer‘s warranty does not aect the statutory warranty provisions.
03.04.2018
15. COMFORT OPTIONS
Room sensor, Radio room sensor
This option permits control of your stove via room temperature. You can set
both the room temperature and the heating times required. A room temperature
selected by you is observed during the heating times.
Please see the operating instructions for the option room sensor and wireless
room sensor for more detailed information.
GSM Control
Your stove can also be controlled via a mobile phone as an additional option.
Please see the operating instructions for the telephone option – GSM for more
detailed information.
Interface for various options
for various options
The ROOM SENSOR, the WIRELESS ROOM SENSOR and the PHONE OPTION –
GSM are to be connected to the interface (stove rear) using the connection cable
supplied.
(condition as delivered)
External room thermostat
Your stove has an interface on the rear wall to which you can connect a
customary room thermostat. This requires a 2-pole cable of 0.50.75 mm
2
cross-
section that you have to connect instead of the cable bridge tted for delivery.
External connection cable bridge
If the control of your stove is to be assumed by an external room thermostat,
you have to connect your external room thermostat instead of the standard
integrated cable bridge.
The connected room thermostat can be operated in either MANUAL or
AUTOMATIC MODE. In both modes, the current set heat output is used, in
AUTOMATIC MODE the heating times set at the stove can also be activated.
You can see whether the external demand is currently activated in the INFO
main menu in submenu item Info - inputs.
If your stove receives an external demand to stop operation, it takes approx.
5minutes until it switches o. All further settings required to your thermostat
can be taken from the respective room thermostat operating instructions.
Note
Operation is not possible unless either a cable bridge or an external room
thermostat is connected. The external demand has priority over all operating
modes (MANUAL/AUTOMATIC/COMFORT).
Option ANIMO Wi-Fire
Only for combination and pellet stoves with touch panel version V2.16 or higher.
The Wi-Fire-module connects your stove to the Internet. You can operate the
stove with any Internet-enabled device (tablet, PC, Smartphone ...). So you
retrieve the operational status, various information and make your settings
remotely.
For further information, please contact your ANIMO dealer.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Animo Aduo at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Animo Aduo in the language / languages: English as an attachment in your email.
The manual is 5,95 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
