696194
25
Zoom out
Zoom in
Previous page
1/28
Next page
25
EN
13. INSTRUCTIONS FOR COMMISSIONING PROTOCOL
FOR PELLET AND COMBI STOVES
The commissioning protocol is to be treated as a documents and serves as the
basis for the warranty and guarantee terms. It is to be completed entirely, in
particular the stove data and addresses, the work to be performed is to be ticked
o after completion. The signatories conrm with their signatures that all the
items on the list have been concluded properly.
Note
Please return 1 completed protocol for putting into service to
RIKA Innovative Ofentechnik GmbH, Müllerviertel 20, 4563 Micheldorf,
Austria.
Electrical periphery
It is important that the connection socket in the electrical periphery is earthed.
The operability of any room thermostat present must be checked. The execution
of commands is to be established by phoning in the case of a GSM modem.
Exhaust gas system
The exhaust line, stove and combustion air inlet are part of the combustion
system as a whole; therefore the correct execution must also be checked.
The plug connections should be tight in general since the system works with
excess pressure. The exhaust tube has a diameter of 100 mm for pellet stove,
and of 150 mm for the combi stove, which is sucient for short distances. In
the case of several changes in direction, the resistance of the exhaust system
can increase with the ue to such an extent that the combustion quality suers
and/or noise arises from the greater ow speed. Correct determination of the
chimney draught can only be performed at nominal thermal output and serves
to evaluate the chimney. If the draught is more than 15 Pa, then a draught limiter
should be installed.
Stove functions
These are the basic stove functions that are to be checked and ticked o. The
stove is ready for operation if these functions are ensured.
Operator instruction
This is one of the most important points in the putting into operation. It is very
important that the operator understands the stove properly and is prepared to
assume responsibility for the basic tasks required for operational safety.
In particular the connection between special features of a biomass heating
system and his obligations as well as the warranty and guarantee terms must
be explained. e.g. non-tested pellets and screw blockers, lack of cleaning or
maintenance and stove malfunctions. Thorough instruction can prevent many
complaints.
Stove functions
Explanation of the processes in the stove during ignition, normal operation,
cleaning phase etc.
Control
Explain operator’s possibilities to intervene, empty pellet container, room
thermostat, GSM modem, functions and settings, program times if necessary.
Operating instructions: Handover and reference to the content to the following
points, is a document.
Warranty terms
Dierence between warranty (statutory) and guarantee (voluntary), terms of
guarantee, determination of wearing parts, reference to pellet quality to be used
and the consequences of poor quality.
Cleaning instructions
Ash and dust occurs with a biomass heating unit. The re trough is to be
cleaned regularly with regular heating operation (in the case of pellet operation,
the drilled air holes in particular must be free of residues). The ash drawer is to
be emptied regularly. The ue gas pipes are to be cleaned once or twice in the
heating season depending on stove type; by a specialist company is best.
Maintenance
Note
We recommend at least once a year to have all maintenance carried out by
your RIKA dealer.
Combustion
All doors must close tightly to prevent intake of false air.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Animo Aduo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Animo Aduo in the language / languages: English as an attachment in your email.

The manual is 5,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Animo Aduo

Animo Aduo User Manual - German - 28 pages

Animo Aduo User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info