696194
24
Zoom out
Zoom in
Previous page
1/28
Next page
24
12. PROBLEMS - POSSIBLE SOLUTIONS
Problem 1
Fire burns with weak, orange ame. Pellets heap up in re trough, window
sooted up.
Cause(s) pellet operation
Q Insucient combustion air
Q Poor chimney draught
Q Stove is sooted over inside
Cause(s) log operation
Q Poor chimney draught
Q Too much fuel
Q Damp wood
Q Incorrect heating up
Q Stove is sooted over inside
Possible solutions pellet operation
Q Remove any ash or clinker from the re trough that may block the air
inlets. If possible swap to better pellet quality
(see CLEANING AND
MAINTENANCE)
Q Check whether ue gas pipes are blocked with ash (see CLEANING AND
MAINTENANCE).
Q Check whether the suction nozzles and air inlet pipe or ue tube are blocked.
Q Check door and cleaning cover seals for leaks (see CLEANING AND
MAINTENANCE)
Q Clean blower impeller (see CLEANING AND MAINTENANCE)
Q Have service performed by authorised specialist company.
Q Every glass plate must be cleaned from time to time (depending on use)
with glass cleaner.
Possible solutions log operation
Q Use dry wood and correct fuel amounts (see BRIEF INFORMATION ON
FUEL - LOGS)
Problem 2
Stove smells strongly and / or fumes are emitted
Cause(s) pellet / log operation
Q Burning-in phase (taking into service)
Q Stove has accumulated dust and/or dirt
Possible solutions pellet / log operation
Q Wait to end of burning-in phase and vent suciently
Q Suction o any dust deposits from the convection air openings at regular
intervals
Problem 3
Flue gas discharge when wood is added and during heating phase.
Cause(s) pellet / log operation
Q Flue gas ap is not open for refueling
Q Combustion chamber door opened too fast
Q Too much ash in combustion chamber
Q Adding logs to snappy
Q Chimney draught too low
Q Flue pipe connection leaks
Q Logs combustion still running (visible ame)
Q Inspection openings leak
Possible solutions pellet / log operation
Q Open the ue gas ap for refueling
Q open the combustion chamber door moderate
Q regular cleaning of combustion chamber (vacuum)
Q Adding logs carefully
Q Check chimney
Q Check connections and if necessary re-seal
Q Add logs after ame is gone (display: „please add logs“)
Q Check seals and replace (re door, plaster cover, ..)
Note
Please note that checks on the control system and wiring ma only be
performed in unit switched dead. Any repairs may only be performed by
trained specialists.
Tip
If a malfunction message occurs, the cause must rst be remedied; the unit
can be put back into operation by acknowledging the malfunction at the
touch display.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Animo Aduo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Animo Aduo in the language / languages: English as an attachment in your email.

The manual is 5,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Animo Aduo

Animo Aduo User Manual - German - 28 pages

Animo Aduo User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info