537057
15
Zoom out
Zoom in
Previous page
1/16
Next page
PART 6 - IMPORTANT INFORMATION (continued)
Wireless Interference
HOW TO AVOID INTERFERENCE?
Angelcare Baby Monitors are designed to
provide optimal performance when set-up
and used according to the instructions.
However, due to increase in wireless products
and systems found on the market today,
some level of interference might occur.
To reduce or avoid such interference we
recommend the following:
Always read the Instructions carefully.
Install and set-up the baby monitor in
accordance to the Instructions provided
with your product
Always keep your baby monitor (Parent
and Nursery Unit) away from other
wireless devices
Never place a cordless or mobile phone
or other radio frequency emissions device
(microwave, wireless router or sound
system) in close proximity or in direct
contact with your baby monitor (Parent
and Nursery Unit)
If you would like to use the belt clip on the
Parent Unit, please ensure your mobile
phone is placed in the pocket opposite the
position of the Parent Unit on your belt
Make sure the batteries in the Parent
Unit are fresh and fully charged for best
performance (use only NiMH rechargeable
batteries)
If you still experience interference, please
refer to the Instructions or the Customer
Service website for more solutions in
solving interference issues
Please refer to the Instruction Manual for
more information on product installation,
testing, warnings and warranty.
Warnings
This product is NOT a medical device
designed to prevent cases of Sudden
Infant Death Syndrome (SIDS or cot
death).
This product is NOT a substitute
for direct supervision of your baby. Check
your baby’s activities at regular intervals.
Monitoring of premature babies, or babies
considered to be at risk, should be carried
out only under the supervision of a doctor
or health professional.
The SensorPad may detect movement from
many sources from both inside and outside
your baby’s room, e.g. washing machine,
loud music, etc. Make sure that all vibration
sources are eliminated before using the
Angelcare monitor. Please do not touch the
baby’s bed when the monitor is in use.
Please read Part 2, Step 1 (Installation of
SensorPad), Part 2, Step 5 (Testing your
Monitor) and the Troubleshooting section.
When monitor is in use, DO NOT use a crib
mobile or other crib accessories that produce
vibrations. This can prevent the movement
alarm from working properly as the monitor
will still be detecting movement.
If the monitor has been stored or has been
exposed to hot or cold temperatures, it may
take up to one hour before the temperature
displayed on the Parent Unit is accurate.
ALWAYS place the Parent and Nursery Units
on a flat surface in an upright position, away
from baby’s reach.
Make sure to plug the adapter into a
convenient accessible socket outlet.
IMPORTANT - STRANGULATION HAZARD
Children have STRANGLED in cords. Keep the
Adapter cords and Sensor Pad cord WELL out
of the reach of children.
DO NOT put the Nursery Unit inside a crib
(cot) or play yard (play pen).
Because of the serious strangulation risk to
infants and toddlers, parents and caregivers
should NEVER place the Nursery Unit within 1
meter (3 feet) of a crib. NEVER use extension
cords with AC Adapters. ONLY use the AC
Adaptors provided.
DO NOT touch the end of the adapter cord
when it is plugged into the mains.
The Angelcare monitor uses public airwaves
to transmit signals. The Parent Unit may
pick up signals or interference from other
baby monitors in your area. Your monitor
may also be picked up by receivers in other
households. To protect your privacy, make
sure both units are in the OFF position when
not in use and change the channels regularly.
The Angelcare monitor is perfectly safe. The
SensorPad and its cord are entirely passive.
They carry no electrical current and do not
radiate any form of energy. The Nursery
Unit emits only very low power radio signals
through its antenna. These signals do not
present a safety hazard.
Your monitor can be used in any crib
or sleeping area (that has no motion or
vibration) designed to hold a baby safely.
ONLY USE ORIGINAL ANGELCARE AC
ADAPTERS, MODEL NO. T07505B001.
Monitoring more than one baby
NEVER use the Angelcare Movement &
Sound Monitor if multiple babies are
sleeping together in ONE bed!
For monitoring more than one baby
(e.g. twins) you need two Angelcare
AC401 Movement & Sound Monitors
and the babies need to be in SEPARATE
beds.
If you are using two Angelcare monitors it
is essential that:
a. Each monitor is set to a different
channel
b. The distance between the two Nursery
Units is at least 1 metre
c. The distance between the Parent Units
is at least 1 metre. If 2 babies are in
one room, we recommend using 1
x Angelcare Movement and Sound
Monitor AC401 and 1 x Angelcare
Movement only Monitor AC300.
Please see website for more
information.
15
!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC401de luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC401de luxe in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC401de luxe

Angelcare AC401de luxe User Manual - German - 87 pages

Angelcare AC401de luxe User Manual - Dutch - 7 pages

Angelcare AC401de luxe User Manual - Dutch, Danish, French, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info