Manual Angelcare AC1300 (page 8 of 62) (English, French, Spanish)

681995

Zoom out

Zoom in

1/62

STEP 2 - INSTALLING THE SENSOR PAD

32 1

Keep

at least

3 ft (0.9 m).

IMPORTANT

32 1

Cord covers 1, 2, 3, 4:

Position on floor

Cord cover 4:

Contains double sided tape to

securely install beneath crib leg

Cord cover 5:

Position vertically between

mattress support and floor

Cord cover 6:

Place under the mattress

Sensor Pad with pre-installed cord covers

2.1 - SELECT A LOCATION FOR THE NURSERY UNIT

Select a location for

the Nursery Unit that

is at least 3 feet [0.9

meter] away from

the crib.

IMPORTANT

Place the crib near a supporting wall and far from air currents. Install the Nursery Unit on a flat, stable

surface facing the crib at a distance of at least 3 feet (0.9 meter). Make sure to plug the adapter to the

socket outlet nearest to the equipment and that is easily accessible.

Figure 1 Figure 2

1) Use the crib leg by the wall closest to the Nursery Unit (Figure 1). In cases where the

Nursery Unit is across the room, use the leg closest to the Nursery Unit to position the

covered wire (Figure 2). It is always preferable that the covered cord run along a wall.

2.2 - SELECT THE CRIB LEG YOU WILL BE USING TO SECURE THE CORD COVERS

RECOMMENDED

1) Remove the mattress from

the crib.

2) Place the Sensor Pad(s) –

printed side up – on top

of the hardboard.

3) Run the connection pin,

warning label and the first

5 cord covers down along

the backside of the crib

leg, between the mattress

support and the inside

edge of the crib.

2.3 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT

1 Sensor Pad

or 2 Sensor Pads

(depending on model)

02mf13_Manuel_AC1300_NA_12301.indd 7 2016-06-29 11:06 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC1300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 21,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Angelcare AC1300 Manual

Product: