537060
11
Zoom out
Zoom in
Previous page
1/16
Next page
Step 15: Signal Strength & Out of Range Indicator
The Signal Strength Indicator shows the strength of signal between the
Parent Unit and Nursery Unit. The Out of Range Indicator will alarm when
the two units have lost connection and the Out of Range Icon will be
visible in the Parent Unit screen.
1. The Signal Strength Icon in the Parent Unit Settings Bar will show the
actual signal strength between the Parent Unit and Nursery Unit
2. The maximum range between the two units is up to 100 metres
indoors and up to 200 metres outdoors
3. An Out of Range alarm will sound when the connection between the
two units is lost
4. Out of Range situations can be caused by (e.g.) too much distance or
thick walls between the two units
5. When the units are Out of Range you will hear a Triple Beep and/or the
Parent Unit will vibrate every 5 seconds and the Out of Range Icon will
be displayed on the Parent Unit screen
6. When the Out of Range alarm sounds move the units closer together
until communication has been (re)established.
HOW TO RECONNECT THE PARENT AND NURSERY UNIT
In the unlikely event that the connection between the Nursery Unit and
the Parents Unit is completely lost, please follow these steps to restore
the connection:
1. Turn both the Parents Unit and the Nursery Unit OFF
2. Turn the Nursery Unit ON
3. Press and release the left wing 4 times. The nightlight will fl ash.
4. Turn the Parent Unit ON. A blue screen will appear with the NO SIGNAL
icon in the Parent Unit Settings Bar
5. While pressing the TALK BACK button on the right hand side of the
Parent Unit, press and release the POWER button on the left hand side
of the Parent Unit
6. If successful, the video capture will appear on the Parent Unit’s screen
again. The connection was successfully restored
Function:
How to use this
function:
PARENT UNIT SETTINGS BAR:
Step 14: Battery Level Indicator
The Battery Indicator shows the remaining battery level of the
rechargeable batteries of the Parent Unit.
1. Install and charge the rechargeable batteries in the Parent Unit as
instructed in Step 3a
2. If possible, keep the Parent Unit in the Charging Cradle at all times
3. If using battery power, always ensure the minimum battery level is
25% full to maintain optimal performance of the monitor
4. If the battery level goes below 25%, recharge immediately
5. The Battery Level Icon in the Parent Unit Settings Bar will show the
actual battery level and will move from left to right whilst charging
6. Fully charged batteries will last up to 6 hours based upon normal
usage, but considerably less if the video screen is turned ON
constantly
Function:
How to use this
function:
PARENT UNIT SETTINGS BAR:
SIGNAL STRENGTH OPTIONS:
OUT OF RANGE ICON:
Good Signal
Low Signal
No Signal
Charging the batteries
Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk
11
AC1100_Manual.indd 11AC1100_Manual.indd 11 19/5/11 2:39:19 pm19/5/11 2:39:19 pm
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC1100 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC1100

Angelcare AC1100 User Manual - Dutch, Danish - 83 pages

Angelcare AC1100 User Manual - French - 59 pages

Angelcare AC1100 User Manual - Polish, Portuguese, Swedish - 83 pages

Angelcare AC1100 User Manual - Spanish - 59 pages

Angelcare AC1100 User Manual - Finnish - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info