704193
12
Zoom out
Zoom in
Previous page
1/24
Next page
English 11
Using the Thermometer
Measurement and Transmitting Data
The communication performs the following steps after building the paring.
Keep the condition of the receiver device so as to communicate.
1. Turn on the thermometer. Data is measured automatically.
2. Data is transmitted after finishing the measurement.
Transmitting Temporarily Stored Data
In cases when the receiver device cannot receive measurement data, the
measurement data is temporarily stored in the thermometer memory. The
data stored in the memory is transmitted the next time a connection is
successfully made to the receiver device
A total of 90 sets of measurement data can be stored. When the amount of
data exceeds 90 sets, the oldest data is deleted and the new data is stored.
The amount of data that can be stored temporarily may vary with the
application.
Time
This thermometer has a built-in clock. The date and time that a
measurement was taken is included in the measurement data.
The built-in clock is designed to be automatically adjusted by syncing with
the clock of a receiver device. Refer to the specifications of the receiver
device. This thermometer has no clock adjustment function.
Changing Units
1. Press and hold the switch above 6 seconds when turning off the
thermometer. New unit is displayed after blinking a last unit.
The thermometer is turns off automatically.
2. When the same operation is
performed again, an effective unit
is exchanged.
The unit is stored in the memory.
The unit of the factory setting
is °C (centigrade).
Turn off the device.
Press and hold the
switch above six seconds.
Last unit
New unit
The device is turned off automatically.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UT-201BLE-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UT-201BLE-A in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AnD UT-201BLE-A

AnD UT-201BLE-A User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info