704193
11
Zoom out
Zoom in
Previous page
1/24
Next page
English 10
Using the Thermometer
Pairing
A Bluetooth device needs to be paired with a different specific device in
order to communicate with that device. If this thermometer is paired with a
receiver device from the start, measurement data is transmitted
automatically to the receiver device each time a measurement is made.
Cautions for Pairing
Only one device can be paired with this thermometer at one time. If the
receiver device cannot receive measurement data, try pairing again
If another receiver device is paired, the first device will be unpaired to
enable the new device to be paired.
Follow the steps below to pair the thermometer with a Bluetooth
compatible receiver device. Also refer to the manual of the receiver device.
Please use a pairing wizard if one is provided.
Pairing Procedure
1. Follow the instructions in the manual of the receiver
device to switch it to the pair able status. When pairing
this thermometer, place it as close as possible to the
receiver device to be paired with.
2. Install the battery as described on page 7.
Press the
switch to turn the thermometer on.
Press the switch while " " is displayed.
The thermometer can be found by the receiver device
while "
" is displayed for approx. one minute.
3. Find, select and build a pair with the receiver device in
accordance with its manual. When the pairing of the
receiver device is built, "
" of the decision of the
pairing is displayed.
4. If "
" is displayed or pairing is failed, remove the
battery and try steps 1 to 3 again.
5. Follow the manual of the pairing receiver device to
search for, select and pair with this thermometer.
Communication Distance
The communication distance between this thermometer and the receiver
device is approximately 5 m.
This distance is reduced by the conditions in the surrounding environment,
so be sure to check that the distance is short enough for a connection to be
made after measurement is complete.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UT-201BLE-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UT-201BLE-A in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AnD UT-201BLE-A

AnD UT-201BLE-A User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info