704202
4
Zoom out
Zoom in
Previous page
1/36
Next page
English 3
Confirmation before use
Confirm that the device is safe and secure for accurate operation.
Operate the device using the provided specified AC adapter.
Only the specified options and consumables are allowed for use with this
device.
When reusing the device, confirm that the device is clean.
Do not apply the cuff to an arm if another electrical medical device is
already attached.
Do not apply the cuff on an arm receiving an intravenous drip or blood
transfusion.
This device should be used at a doctor or medical worker only. The device
is not designed to be operated by a patient to avoid accidents and ensure
accurate results.
Also, do not use the device for home health care.
Do not use the device in an ambulance or ambulance helicopter.
Doing so will prevent the device from providing accurate measurements.
Do not use the device where plugging and unplugging of the AC adapter
may be difficult.
Clinical testing has not been conducted on newborn infants and pregnant
women. Do not use on newborn infants or pregnant women.
Confirm that there is no harm to the patient when the cuff is applied to the
patient’s arm and if the patient has had a mastectomy then avoid the
adjacent arm.
Precautions during using the device
When error display appears on the device or there are some doubts in the
measurement values, confirm the patient’s vital signs by using the
palpation or auscultation method. Check that the air hose has not been
bent or blocked.
Should an error be displayed on the device or test subject, stop the device
and take corrective actions to regain safety.
Do not wrap the cuff on the arm with a wound. That may not only result in
reopening the wound but could also cause an infection.
Ensure that the position of the cuff is applied at the same level as the heart.
(Otherwise, the blood pressure value results in an error.)
Do not start to measure the blood pressure without wrapping the cuff
around the arm. That may result in the cuff bursting or other damage.
Regularly confirm patient status when the measurement is performed
frequently or for a long time. Otherwise, it may cause damage due to
peripheral arterial disease.
Use the device so that the air hose is not bent or blocked. Using the cuff
while the air hose is kinked or bent may result in a peripheral circulatory
failure due to a hemostasis in the arm, remaining the air in the cuff.
Do not apply the excessive force to the AC adapter cable, such as lifting
the device or pulling out the AC adapter, by holding the AC adapter cable.
Do not pull out or do not connect the specified AC adapter with a wet hand.
That may result in an electrical shock or getting a burn.
While measuring, do not connect or disconnect the AC adapter or battery or
perform maintenance on them.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UM-211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UM-211 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info