704180
9
Zoom out
Zoom in
Previous page
1/15
Next page
English 8
Measurements
Measurement With Storing Data
1. Place the cuff on the arm (preferably the left arm).
Sit quietly during measurement.
2. Press the
START
button.
The buzzer sounds and the average blood pressures
and the WHO classification and last data number are
displayed briefly.
When the " 0 " is flashing, the device is ready for
measurement. If the
mark is displayed, the cuff
has some air trapped in it. Press the exhaust valve
button until the
mark is displayed.
3. Pressurize the cuff by squeezing the rubber bulb.
A pressure bar indicator and the current pressure are
displayed.
Stop squeezing the rubber bulb when the mark
disappears.
Note: If you want to stop inflation at any time, stop
squeezing the rubber bulb and press the
exhaust valve button to expel the air from the
cuff.
4. When inflation is complete, deflation starts
automatically and the buzzer sounds and the
(heart mark) blinks, indicating that the measurement
is in progress. Once the pulse is detected, the mark
flashes and the buzzer sounds with each pulse beat.
5. When the measurement is complete,
the buzzer sounds and the
mark is
displayed. The systolic and diastolic
pressure readings and pulse rate are
displayed and stored.
6. Press the exhaust valve button to
completely release air from the cuff.
When a measurement is made with
insufficient pressure, the
mark will be
displayed. Re-pressurize the cuff. Stop
squeezing the rubber bulb when the
mark disappears.
When a measurement is made with an
erratic pulse or in a very noisy
environment,
will display.
7. Turning the power off
Press the
START
button to turn the power off.
The device will be in standby mode.
8. Subsequent measurements
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UA-705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UA-705 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info