704180
8
Zoom out
Zoom in
Previous page
1/15
Next page
English 7
Using The Monitor
Applying The Arm Cuff
1. Wrap the cuff around the upper arm, about
1 to 2 cm above the inside of the elbow, as
shown.
Place the cuff directly against the skin, as
clothing may cause a faint pulse and result
in a measurement error.
2. Constriction of the upper arm, caused by
rolling up a shirtsleeve, may prevent
accurate readings.
3. Confirm that the index
points within the
proper fit range.
How To Take Proper Measurements
For the most accurate blood pressure measurement:
Sit comfortably on a chair. Rest your arm on the table. Do not cross your legs.
Keep your feet on the floor and straighten your back.
Relax for about five to ten minutes before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure immediately after physical exercise or a bath. Rest for twenty or
thirty minutes before taking the measurement.
Try to measure your blood pressure at the same time every day.
Measurement (Operation)
During measurement, it is normal for the cuff to feel very tight.
Select a measurement mode (operation of the device).
Normal measurement with storing data :
.....................................................
Press the START button.
Recalling data :
............................................................
Press and hold the START button to recall data.
Clearing data :
......................................................................................................
Remove the battery and re-install it.
After Measurement
After the measurement is completed, remove the cuff and record your data, then
press the
START button to turn off the power.
Note: The device is an automatic power shut-off function, which turns the power off
approximately one minute after measurement.
Allow at least three minutes between measurements on the same person.
Do not roll up shirtsleeve tightl
y
1 to 2 cm
A
ir hose
Cuff
Inde
x
and Proper fit range
A
rtery position mar
k
Secure the fabri
c
fastener firmly
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UA-705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UA-705 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info