704181
9
Zoom out
Zoom in
Previous page
1/15
Next page
English 8
Measurement
1. Place the cuff on the arm (preferably the left arm).
2. Press the
START button.
When the START button is pressed, all of the
display symbols will display for about one
second.
When the " 0 " is flashing, the device is ready for
measurement. If the
mark is displayed, the
cuff has some air trapped in it. Press the
exhaust valve button until the
mark is
displayed.
3. Pressurize the cuff by squeezing
the rubber bulb.
The figure on the left of the
display shows the current
pressure as you inflate the
cuff.
Stop squeezing the rubber
bulb when the
mark
disappears.
4. When pressurization is
completed, the automatic
exhaust mechanism will
gradually reduce the pressure in
the cuff and the
mark will
display along with the current
pressure reading on the left.
Remain still during the
measurement. When a pulse
is detected, the
mark will
flash in unison with the pulse
of the person being
monitored.
5. When the measurement is
complete, the
mark is
displayed. The systolic pressure
is displayed on the left. The
diastolic is displayed on the
right. The pulse rate alternates
with the systolic and diastolic
displays.
START button
Stop squeezing the
bulb when the
mark disappears.
Detecting the pluse,
the mark is flashed.
Flashing
Systolic pressure
Diastolic pressure
A
lternating display
Pulse rate
Squeeze bulb
Current pressure.
Automatic air release.
Gradually being reduced.
Measurement in
Bulb
To next page
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UA-704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UA-704 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info