(1) Enter the function menu and use “(-)” or “(+)” button to access THEXP function, then select the “FWD-
EXP” function.
(2) Press “(-)” or “(+)” button to select RATE for adjustment, set the most comfortable value you want. From
the graph you will clearly see the changes you have made on the EXP RATE, also move the trigger to check
the throttle status.
Adjustment method for BRK-EXP curve
Setup Items
RATE: BRK-EXP rate
Adjustment range
RATE: -100 ~ 0 ~ +100
0 ~ -100: flat braking
0: uniform braking
0 ~ +100: sensitive braking
Brake side adjustment (select BRK)
(1) Press “Enter” key, the current BRK value will blink, use “(+)” button
to adjust the + side when you want to quicker the rise and use “(-)” button to adjust the -side when you want
to make the rise milder. (Note: In the interface of adjusting the value, return to the initial value "0" by
pressing “(-)” and “(+)” buttons simultaneously for about 1 second.)
(2) Press “Enter” button, the adjusted BRK value stops blinking, now the BRK value has been set.
(3) When ending setting, return to the initial screen by pressing “Exit” button twice.
4.8 Throttle Speed „THSPD“
Throttle servo delay
Sudden trigger operation on a slippery road only causes the wheels to spin and the vehicle cannot
accelerate smoothly. Setting the throttle speed function reduces wasteful battery consumption while at the
same time permitting smooth, enjoyable operation.
Operation
Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if the throttle trigger is
operated more than necessary. This delay function is not performed when the throttle trigger is returned
and at brake operation.
OFF: Speed1 or speed2 can be selected.
OFF means shut down the throttle speed function
