4.2 Language Select "LANGUAGE"
Both English and German version menu are available for which is
convenient for German and English-speaking user to personalize
function menus.
(1) Access the function menu (By pressing “Exit” and “Enter” buttons
simultaneously and holding them down for one second), the
Language select function will be chosen.
(2) Press “Enter” button to get into “LANGUAGE” function interface.
(3) Use “(-)” or “(+)” key to select “German” or “English”, the selected
language will be with black shading effect.
(4) Press “Enter” button, the desired language is selected, and return
to the initial screen automatically.
4.3 Model Select "MODEL"
ATX4 can store model memories for ten models. Use this function to
call a new model.
(1) Access the function menu (By pressing “Exit” and “Enter” buttons
simultaneously and holding them down for one second), press
“Enter” key once, the Model select function will be chosen.
(2) Press “Enter” button, the current active model will be blinking.
(3) To activate a different model by pressing “(-)” or “(+)” button until
the desired model blinks.
(4) Press “Enter” button, the selected model stops blinking, now the
model has been selected.
(5) Return to the initial screen by pressing “Exit” button twice.
4.4 End Point Adjuster "EPA"
Use EPA when performing left and right steering angle adjustments,
throttle high side/brake side operation amount adjustment, and
channel 3 servo up side/down side operation amount adjustment
during linkage. Correct the maximum steering angle and left and right
steering angles when there is a difference in the turning radius due to
the characteristics, etc. of the vehicle.
Setting item (channel and direction)
ST: Steering (left/right)
TH: Throttle (forward/brake)
CH3: 3rd channel (left/ right)
CH4: 4th channel (left/ right)
