567781
9
Zoom out
Zoom in
Previous page
1/15
Next page
Preparing the Equipment
26
Activating the signal
In order to activate the alarm to trigger at the set time, turn the
rotary knob (3) clockwise to ON".
Operating the vibration pad
In order to use the vibration pad, it must initially be fully charged:
1. Connect the alarm clock to the mains power supply via the
power adapter plug.
2. Remove the small rubber cap from the sliding switch on the
vibration pad.
3. Plug one end of the connection cable in the socket in the
vibration pad and in the other end in the socket for the
vibration pad in the alarm clock.
4. The LED on the vibration pad lights up red.
5. When the vibration pad is fully charged, disconnect the
connection cable from the alarm clock.
6. Use the sliding switch on the vibration pad to switch it on.
7. Set the alarm type on the alarm clock to vibration" or
acoustic alarm + vibration".
On reaching the set time, the vibration pad vibrates
intermittently until the alarm function is interrupted by
pressing the Snooze button (1).
Using the telephone signal
You can also use the TCL 200 alarm clock to signal incoming
telephone calls. Connect the TCL 200 alarm clock to the
telephone connection socket as illustrated in the connection
diagram.
Each incoming call is then diverted to the alarm clock and the
acoustic signal is triggered by each call regardless of the alarm
time set.
0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amplicomms TCL200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms TCL200 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amplicomms TCL200

Amplicomms TCL200 User Manual - German - 17 pages

Amplicomms TCL200 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info