541772
10
Zoom out
Zoom in
Previous page
1/20
Next page
SVT-4 PRO Bass Guitar Amplifier
10
The Front Panel continued
21. CROSSOVER FREQUENCY: This sets
the crossover point between the Bi-amp
High and Bi-amp Low outputs when
using the amplifier in bi-amp mode
(see ‘Hook-up Diagrams’, pages 5–7).
22. CROSSOVER BALANCE: This adjusts
the relative level between the low and
high frequency bi-amp signals when
using the amplifier in the bi-amp mode.
23. 9–BAND GRAPHIC EQ: These sliders
control the output frequencies indicated
above each control. The center position
of each control is flat [no boost or cut].
The Graphic EQ may be used in two ways:
1) To fine tune the sound, make small
adjustments at the desired frequencies
and leave the EQ on throughout the entire
session. (This is great for adapting to
varying room acoustics when playing
multiple venues) and...
2) For a completely different sound, make
larger adjustments and only activate the
EQ when a “second channel” sound is
required (such as during bass solos).
1 2 5 6 7 10 113 4 8 9
23
12 13 1614 15 19 21 222017 18
24 2725 26
24. LEVEL: This slider is the output
volume control for the Graphic EQ and
only affects the signal when the EQ is
engaged. If the EQ’d signal is too soft,
slide the level control up; if it’s too loud,
slide this control down.
25. POWER LED: This LED illuminates
green when the power switch [27] is up.
26. ACTIVE LED: This LED illuminates when
the Graphic EQ switch [15] is engaged.
27. POWER SWITCH: Use this switch to
turn the overall system power on or
off. Press the top of the switch to turn
on the power. Press the bottom of this
switch to put the amp into standby
mode. It will not function, but the circuits
are still live. To remove AC power, either
turn off the AC mains supply, or unplug
the power cord from the speaker and
the AC mains supply.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ampeg SVT-4 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ampeg SVT-4 Pro in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info