541772

Ampeg SVT-4 Pro Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
SVT-4 PRO Bass Guitar Amplifier SVT-4 PRO Bass Guitar Amplifier
9
1 2 5 6 7 10 113 4 8 9
23
12 13 1614 15 19 21 222017 18
24 2725 26
10. BASS: Use this to adjust the low
frequency level of the amplifier.
This provides up to 12 dB of boost,
or 12 dB of cut at 50 Hz. The low
frequency output is flat at the center
position.
11. MIDRANGE: Use this to adjust the
midrange frequency level of the
amplifier. This provides up to 15 dB of
boost, or 15 dB of cut at the center
frequency selected by the frequency
control [12]. The midrange frequency
output is flat at the center position.
Rotate the control counter clockwise
for a “contoured” sound (more distant,
less midrange output) or clockwise for a
sound which really cuts through.
12. FREQUENCY: This control allows you to
select the center frequency for the
midrange control [11], giving you a
choice of five “voices” for the midrange.
The numbers correspond to the
following center frequencies: 1=220 Hz,
2=450 Hz, 3=800 Hz, 4=1.6 kHz,
5=3 kHz.
13. TREBLE: Use this to adjust the high
frequency level of the amplifier. This
provides up to 14 dB of boost, or
19 dB of cut at 5 kHz. The high
frequency output is flat at the center
position.
14. BRIGHT: When this switch is engaged, a
more lively top end response [+6 dB at
2 kHz] is added to the input signal.
15. GRAPHIC EQ: When this switch is
engaged, the 9-band graphic EQ is
enabled. A footswitch overrides this
switch.
16. LINE OUT LEVEL: This controls the
strength of the signal at the line out
jacks [40, 41, 44, 45].
17. EFFECTS BYPASS: When this switch is
engaged, the effects loop is bypassed.
A footswitch overrides this switch.
18. LIMIT DEFEAT: The SVT-4 PRO employs
internal limiter circuits to help keep
the power amplifier’s output clean at
extreme volume levels. (All amplifier’s
may begin to clip their output signals as
they approach maximum output levels,
resulting in potentially speaker-damaging
distortion.) These circuits may be
defeated by engaging this switch, which
may result in an increase in output
power but with the possibility of
distortion. Use discretion whenever
playing with the limit circuits defeated.
19. MASTER: Use this to control the
overall output level. Use it wisely and
turn it down when making connections
or trying something new.
20. LIMIT LED: This LED will flash any time
the internal limit circuit is called upon to
keep the amplifier’s output signal clean.
This indicates that the amplifier is
nearing full output and the limiter is
keeping it from clipping the output
signal.
The Front Panel continued
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ampeg SVT-4 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ampeg SVT-4 Pro in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info