792117
13
Zoom out
Zoom in
Previous page
1/16
Next page
Str: The strength value of the connected signal.
Qlt: The quality value of the connected signal.
7.2 AUTO SCAN
The meter will scan all the saved frequencies and show the lock status one by one and will then return to the
main menu once scanning is finished. Press [MENU] to abort a scan in progress and return to the main menu.
User`s Manual
18 / 25
7.
DVB-C
User can measure DVB-C live signal in this submenu. There
are total six submenus: Cable Measure, Auto scan, RF
channel list, Tilt , Spectrum chart and Trunk voltage.
7.1
C
ABLE MEASURE
User can read SNR, BER, PER, level, strength and quality of
the live signal.
: The lock status. The signal is locking if the icon is green otherwise the
color of the icon is red.
C18: The frequency channel name.
DVB C: The cable system. The values are DVB C ,DVB C2 and MCNS. Press [/]
to switch them.
FREQ: The current frequency. Press [/] to change the value or press [OK] to
edit it.
SYM: The symbol rate of the current signal. The device will get it
automatically once the signal is locking.
SNR: The signal noise rate value of the live signal.
BER: The bit error rate of the live signal.
PER: The packet error rate of the live signal.
LEVEL: The power level value of the live signal.
Str: The strength value of the connected signal.
Q l t : The quality value of the connected signal.
7.2
A
UTO
S
CAN
The meter will scan all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
7.3
RF
C
HANNEL
L
IST
This menu shows all the locked frequencies during Auto Scan.
7.3 RF CHANNEL LIST
This menu shows all the locked frequencies during Auto Scan.
7.4 TILT
This menu shows tilt of three channels` power level.
User`s Manual
19 / 25
7.4
T
ILT
This menu shows tilt of three channels` power level.
C16,C17, C18: The channel number. Press [/] to switch between them. Press
[/] to change the channel number and press [OK] to pop out
the channel list to select.
FREQ: The frequency of each channel
LEVEL: The power level of the first channel
DELTA1: The delta of power level to the first channel
DELTA2: The delta of power level to the first channel
7.5
S
PECTRUM
C
HART
This menu shows the spectrum chart of the setting
frequency range. Please see below screenshot.
Press [/] to switch between current frequency, start
frequency and end frequency:
Press [/] to change start or end frequency of the
spectrum frequency range if the curse is focusing on the
start or end frequency icon.
40~50~60: The range of the level value. Press [F3] to switch range between 40~60,
40~80 and 40~100.
C6/175MHz/0 dBuV: The curse of the current frequency and power level. Press [/]
to change the value.
162: The start frequency of the spectrum chart.
498: The end frequency of the spectrum chart.
7.6
T
RUNK
V
OLTAGE
This menu measures the trunk voltage. Press [OK] to switch
alternating current and direct current.
C16,C17, C18: The channel number. Press ▼/▲ to switch between them. Press ▼/▲ to change the channel
number and press [OK] to pop out the channel list to select.
FREQ: The frequency of each channel
LEVEL: The power level of the first channel
DELTA1: The delta of power level to the first channel
DELTA2: The delta of power level to the first channel
7.5 SPECTRUM CHART
This menu shows the spectrum chart of the setting frequency range. Please see below screenshot.
User`s Manual
19 / 25
7.4
T
ILT
This menu shows tilt of three channels` power level.
C16,C17, C18: The channel number. Press [/] to switch between them. Press
[/] to change the channel number and press [OK] to pop out
the channel list to select.
FREQ: The frequency of each channel
LEVEL: The power level of the first channel
DELTA1: The delta of power level to the first channel
DELTA2: The delta of power level to the first channel
7.5
S
PECTRUM
C
HART
This menu shows the spectrum chart of the setting
frequency range. Please see below screenshot.
Press [/] to switch between current frequency, start
frequency and end frequency:
Press [/] to change start or end frequency of the
spectrum frequency range if the curse is focusing on the
start or end frequency icon.
40~50~60: The range of the level value. Press [F3] to switch range between 40~60,
40~80 and 40~100.
C6/175MHz/0 dBuV: The curse of the current frequency and power level. Press [/]
to change the value.
162: The start frequency of the spectrum chart.
498: The end frequency of the spectrum chart.
7.6
T
RUNK
V
OLTAGE
This menu measures the trunk voltage. Press [OK] to switch
alternating current and direct current.
Press
▼/▲
to switch between current frequency, start frequency and end frequency:
Press
/
to change start or end frequency of the spectrum frequency range if the curse is focusing on the
start or end frequency icon.
40~50~60: The range of the level value. Press [F3] to switch range between 40~60, 40~80 and
40~100.
C6/175MHz/0 dBuV: The curse of the current frequency and power level. Press
/
to change the value.
162: The start frequency of the spectrum chart.
498: The end frequency of the spectrum chart.
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko TSC-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko TSC-1000 in the language / languages: English as an attachment in your email.

The manual is 2.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info