794715

Amica ZWM 496W Manual

21
Zoom out
Zoom in
Previous page
1/24
Next page
21
CLEANING AND MAINTENANCE
Regular dishwasher cleaning can extend its life-
time of trouble-free operation.
Grease and limescale can accumulate in dish-
washer chamber. In the event of such accumula-
tion
- Add detergent and do not load any dishes. Select
a high temperature washing programme and start
the dishwasher. If the result is not satisfactory, use
a special cleaner available on the market. (Clean-
ers manufactured specically for dishwashers).
Clean the dishwasher door seal
To remove any accumulated residue from the door
seals, wipe the seals regularly with a damp cloth.
Clean the dishwasher
Clean the spray arms and lters at least once a
week. Before cleaning unplug the dishwasher from
wall outlet and close the water supply valve. Do
not use harsh or abrasive materials when clean-
ing. Wash with a mild cleaning agent and a damp
cloth.
Filters
Check if food residue has ac-
cumulated on the strainer and
ne lter. If so, remove the lters
and clean them thoroughly
under running water.
1. Main lter
2. Strainer
3. Fine lter
1. Remove the lower basket.
2. Turn the strainer counter-clockwise and pull it
up.
3. Remove the lter assembly.
4. Remove the ne lter from the strainer
5. Thoroughly clean the lters under running
water. Use a brush if necessary.
6. Install the lters in reverse order.
7. Insert the lter assembly into the chamber and
then turn clockwise.
• Never use the dishwasher without the
lter assembly.
• Improper mounting of the lters reduces
the dishwashing effectiveness.
• Clean lters are key to correct dishwash-
er operation.
Spray arms
Make sure that jet nozzles the upper and lower
spray arm are not clogged. If jet nozzles are
clogged, remove the spray arms and clean them
under running water.
Remove the lower spray arm by pulling it upwards,
while the upper arm is removed by turning the nut
counter-clockwise.
When mounting the spray arm make sure that the
nut is well tightened.
Water supply hose lter
The water is ltered by the lter in the water supply
line to avoid damage to the appliance due to impu-
rities (such as sand, clay, rust, etc.) that occasion-
ally occur in water. This will also prevent accumu-
lation of sediment after dishwashing. Periodically
inspect the lter and hose and clean if necessary.
To clear the lter, close the water supply valve,
then remove the hose. Remove the lter from the
hose and clean it under running water. Replace
the clean lter inside the hose. Install the hose.
Cleaning the door lock
After each use wipe the door lock and around with
a cloth soaked with mild detergent and wipe dry.
Do not ood the lock with water. Do not use any
aerosol cleaners. They may damage the lock and
electric components inside.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica ZWM 496W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica ZWM 496W in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info