794715
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
TURN ON THE APPLIANCE AND SELECT PROGRAMME
1. A cycle that is underway can only be modied if it has only been running for a short time. Otherwise,
the detergent may have already been released, and the appliance may have already drain ed the wash
water. If this is the case, the detergent dispenser must be relled (see the section entitled “Loading the
Detergent“ ).
2. With the door closed, press the running program button more than 3 seconds, the machine will be in
standby state, then you can change the program to the desired cycle setting (see the section entitled
“Starting a wash cycle. . .” ).
If you open the door during a wash cycle, the machine will pause. The program light will
stop blinking and the buzzer will mooing every minute unless you close the door. After
you close the door, the machine will keep on working again. If your model has broken remember
function, the machine will go on to nish the selected program after the power cut.
A forgotten dish can be added any time before the detergent cup opens.
1 Open the door a little
2. After the spray arms stop working, you can open the door completely.
3. Add forgotten dishes.
4. Close the door
5 The dishwasher will run again.
WARNING!
When the working cycle has nished, the buzzer of the dishwasher will sound for 8 seconds, then
stop. Turn off the appliance using the ON/OFF button, shut off the water supply and open the
door of the dishwasher. Wait for a few minutes before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to breakage. They will also
dry better.
Change programme
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica ZWM 496W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica ZWM 496W in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info