733755
31
Zoom out
Zoom in
Previous page
1/42
Next page
29
User’s manual
EN
1. Press the ON key and wait a few seconds for the robot to turn on completely.
Enter the password (if prompted) (See “Password Entry”). Press “Enter” if the
information messages remain on the display.
2. The “PAUSE” function appears on the display.
ENTER
PAUSE
3. Enter into programming mode and select “WORK MODE”. Select “CLOSED
AREA” and the words “CLOSED AREA 60 Min” (default value) will appear
on the display.
4. Press either the “+” or “-” key to set the minutes.
5. Press “ENTER” to conrm.
6. Press the “PLAY/PAUSE” key to exit the programming menu and then restart
the robot. After the set time, the robot safely stops next to the perimeter wire.
7. Restore the normal functioning of the robot as described in chapter “INITIAL
START UP – AUTOMATIC MODE”.
ENTER
CLOSED AREA
60 min
PASSWORD ENTRY
The robot can be protected by a password consisting of four numbers which can be enabled, disabled and personalised by the
user (see “Programming Mode”).
1. On the display appears the message:
2. Press either the “+” or “-” key to set the rst number.
3. Press “ENTER” to conrm. The cursor moves to the next position.
4. Repeat the procedure to set all the numbers of the password.
The robot is now ready for use.
ENTER
PASSWORD
0000
VISUALISING THE DISPLAY DURING THE WORK PHASE
While in operation, the following data appears on the display of the robot:
-
speed of mower;
-
cutting blade speed;
-
percentage of battery charge.
While the robot is charging, the word “CHARGING” appears on the display.
If the robot is outside the working time, the display shows the day and time of the
next scheduled start.
ENTER
28m/min 2800rpm
Battery 75%
1
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L85 in the language / languages: English as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L85

Ambrogio L85 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info