733755
30
Zoom out
Zoom in
Previous page
1/42
Next page
28
User’s manual
EN
ROBOT SAFETY STOP
During use, it may be necessary to stop the robot. In normal conditions, the robot can be stopped with the “OFF” key. In case
of danger or when performing any maintenance, it is necessary to stop the robot in safe conditions in order to prevent the blade
from accidentally starting. Press the "STOP" key to stop the robot. Disconnect the power plug from the electrical outlet.
Important
The robot safety stop is necessary during
maintenance and repairs (for example, blade
replacement, cleaning operations, etc.).
To start, proceed as indicated:
-
position the robot inside the cutting area;
-
press the ON key and wait a few seconds for the robot to
turn on completely. Enter the password (if prompted) (See
“Password Entry”). Press “Enter” if the information messages
remain on the display. The display will light up, "Pause" is
indicated shortly after, the robot is now in the pause state;
-
press the "PLAY/PAUSE" key.
If the robot is started up outside of the cutting area, the blade
motor will not start and after briey searching for the signal, the
robot will show "OUT OF BORDER" on the display. Press "OFF",
position the robot inside the cutting area and carry out the start up
procedure again.
ENTER
ON PLAY
PAUSE
HOME
WORK
OFF
“STOP” KEY (A)
AUTOMATIC RETURN TO THE CHARGING STATION
The robot stops the work cycle if the following conditions are veried:
-
End of working time: at the end of the working time, the robot automatically returns to the charging station and starts
operating again according to what has been programmed (see “Programming Mode”);
-
Rain: with the function active, the robot returns to the recharging station automatically and will start working again as
programmed (see "Programming mode");
-
Battery to be charged: the robot automatically returns to the charging station;
-
Lawn mowed (only for some versions, see “Technical Specications): if the sensor detects that the lawn has already been
mowed, it automatically returns to the charging station and starts operating again according to what has been programmed
(see “Programming Mode”).
USE OF THE ROBOT IN CLOSED AREAS WITH NO CHARGING STATION
The start-up of the robot in “closed area” mode is for mowing
closed areas which are delimited by the perimeter wire and which
have no charging station.
Warning – Caution
Carry the robot using the handle provided. Do not
grab the robot by the body and always use the
handle provided.
Position the robot inside the work area at a minimum distance
of 100 cm (39.37 ") from the perimeter wire and from any other
obstacle.
min. 100 cm
(39,37 ")
min. 100 cm
(39,37 ")
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L85 in the language / languages: English as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L85

Ambrogio L85 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info