644612
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
User’s manual
EN
Problem Cause Remedy
The ashing of the LEDs
signals a “wheel motor
error” LED ashes.
(1 FLASH of the green ON/
OFF led - Right motor error).
(2 FLASHES of the green
ON/OFF led - Left motor
error)
Uneven ground or ground with
obstacles that impede movement.
Check that the lawn to mow is even and does
not have any holes, stones or other obstacles.
If so, ll in any holes and remove any obstacles
(see “Preparation and dening the boundaries of
the work areas”).
One or both wheel motors has a fault.
Have the motor repaired or replaced by the
nearest authorised service centre.
PLAY
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
OFF
The ashing of the LEDs
signals a “motor/blade
error”.
(3 consecutive FLASHES of
the green ON/OFF led).
Cutting blade damaged.
Replace the blade with a new one (see “Blade
Replacement”).
Cutting blade fouled (tape, ropes,
plastic fragments, etc.).
Stop the robot safely (see “Robot Safety Stop”).
Warning – Caution
Use protective gloves to avoid the risk of
injury.
Remove the cause of fouling of the blade.
The robot was started too close to
obstacles (less than 1 m. (40.00 ")
away) or in the presence of unexpected
obstacles (fallen branches, forgotten
objects, etc.).
Stop the robot safely (see “Robot safety stop”).
PLAY
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
OFF
Remove the obstacles and restart the robot.
Electric motor failure.
Have the motor repaired or replaced by the
nearest authorised service centre.
Too high grass.
Increase the cutting height (see “Cutting height
adjustment”).
Carry out a preliminary cutting of the area with a
normal lawnmower.
The ashing of the LEDs
signals a “tip-over error”.
(4 consecutive FLASHES of
the green ON/OFF led).
Ground with too much slope or with
undened borders.
Check the installation rules.
Tip-over sensor failure.
Try to restart the robot. If the problem persists,
have the robot repaired by the nearest
authorised service centre.
PLAY
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
OFF
The ashing of the LEDs
signals a “curb drop-off
sensor error”.
(Led (ON/OFF) 5
consecutive ashes).
When the robot is started it does not
detect the curb drop-off sensor data
correctly.
Clean the sensors and start the robot again. If
the problem continues, decide whether to start
the robot with the curb drop-off sensors off,
otherwise contact the Authorised Service Centre
closest to you.
PLAY
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
OFF
The power supply unit does
not turn on.
No electricity.
Check that the power supply unit is correctly
connected to the power outlet.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L50 in the language / languages: English as an attachment in your email.

The manual is 9,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L50

Ambrogio L50 User Manual - German - 23 pages

Ambrogio L50 User Manual - German - 18 pages

Ambrogio L50 Additional guide - Dutch - 3 pages

Ambrogio L50 Additional guide - Dutch - 2 pages

Ambrogio L50 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info