644612
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
User’s manual
EN
TROUBLESHOOTING GUIDE
TROUBLESHOOTING
The information below is designed to help identify and correct any faults and/or malfunctions which may occur during operation.
Some failures can be resolved by the user; others require specic technical skills or special abilities and therefore must only be
resolved by qualied personnel with certied experience gained in the specic eld of intervention.
Problem Cause Remedies
The robot is very noisy.
Cutting blade damaged.
Replace the blade with a new one (see “Blade
Replacement”).
Cutting blade fouled (tapes, ropes,
plastic fragments, etc.).
Stop the robot safely (see “Robot safety stop”).
Warning – Caution
Use protective gloves to avoid the risk of
injury.
Remove the debris from the blade.
The robot was started too close to
obstacles (less than 1 m. (40 ") away)
or in the presence of unexpected
obstacles (fallen branches, forgotten
objects, etc.).
Stop the robot safely (see “Robot safety stop”).
Remove the obstacles and restart the robot.
Electric motor failure.
Have the motor repaired or replaced by the
nearest authorised service centre.
Too high grass.
Increase the cutting height (see “Cutting height
adjustment”).
Carry out a preliminary cutting of the area with a
normal lawnmower.
The work area is not
completely mowed.
Not enough work hours. Start the robot every day.
Cutting blade fouled with deposits and/
or residuals.
Stop the robot safely (see “Robot safety stop”).
Warning – Caution
Use protective gloves to avoid the risk of
injury.
Clean the cutting blade.
Cutting blade worn.
Replace the blade with original spare parts (see
“Blade Replacement”).
Work area is too big compared to the
actual capacity of the robot.
Adjust the work area (see “Technical
Specications”).
The batteries are about to end their life
cycle.
Replace the batteries with original spare parts.
The batteries do not recharge
completely.
Clean and remove any oxidizations from the
contact points of the batteries (see “Robot
cleaning”). Recharge the batteries for at least 4
hours.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L50 in the language / languages: English as an attachment in your email.

The manual is 9,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L50

Ambrogio L50 User Manual - German - 23 pages

Ambrogio L50 User Manual - German - 18 pages

Ambrogio L50 Additional guide - Dutch - 3 pages

Ambrogio L50 Additional guide - Dutch - 2 pages

Ambrogio L50 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info