733758
38
Zoom out
Zoom in
Previous page
1/42
Next page
36
User’s manual
EN
Problem Cause Remedies
“Wheel error” appears on the
display
Ground is uneven or contains obstacles
that prevent movement
Make sure the lawn to be mowed is even
and does not contain holes, stones or other
obstacles. Otherwise, ll in any holes and
remove any obstacles (see “Preparation and
marking the boundaries of the work areas
(primary and secondary areas)”)
Failure of one or both motors that
operate the transmission of the wheels
Have the motor replaced or repaired by your
nearest authorised service centre
“Too high grass” or
“Blade Error”appears on the
display
Cutting blade damaged
Replace the blade with a new one (see “Blade
Replacement”)
Cutting blade clogged by residuals
(tape, cords, plastic fragments, etc.)
Stop the robot safely (see “Robot Safety Stop”)
Warning – Caution
Use protective gloves to prevent injuries to
your hands
Unclog the blade
The robot was started in the presence
of obstacles (fallen branches, forgotten
objects, etc.)
Stop the robot safely (see “Robot Safety Stop”)
Remove the obstacles and restart the robot (see
“Start up - Automatic mode”)
Electric motor failure
Have the motor replaced or repaired by your
nearest authorised service centre
Grass too high
Increase the cutting height (see “Adjustment of
Cutting Height”). Perform a preliminary cutting of
the area with a normal lawnmower
“Tilt” appears on the display
The robot is located on a slope that is
higher than the allowed limits
Mark off the area that is too steep
The led
(c) does
not turn on
No power supply
Make sure the power supply unit is correctly
connected to the power outlet
Interrupted fuse
Have the fuse replaced by your nearest
authorised service centre
The
transmitter
LED (C)
is on
Interrupted perimeter wire
Stop the robot safely (see “Robot Safety Stop”).
Disconnect the power plug from the power
supply unit. Join the perimeter wire
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L250 Deluxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L250 Deluxe in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L250 Deluxe

Ambrogio L250 Deluxe User Manual - German - 42 pages

Ambrogio L250 Deluxe User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info