733758
36
Zoom out
Zoom in
Previous page
1/42
Next page
34
User’s manual
EN
TROUBLESHOOTING
TROUBLESHOOTING GUIDE
The information below is designed to help identify and correct any faults and/or malfunctions which may occur during operation.
Some faults can be xed by the user, while others require specic technical skills or special expertise and therefore must only be
xed by qualied personnel with certied experience in the specic eld of intervention.
Warning – Caution
Safely stop the robot (see “Robot Safety Stop”) in case it is necessary to check the robot, in order to avoid
danger of accidental blade starting.
Problem Cause Remedies
Abnormal vibrations
The robot is very noisy
Cutting blade damaged
Replace the blade with a new one (see “Blade
Replacement”)
Cutting blade clogged by residuals
(tape, cords, plastic fragments, etc.)
Safely stop the robot (see “Robot Safety Stop”).
Unclog the blade
Warning – Caution
Use protective gloves to prevent injuries to
your hands
The robot was started in the presence
of obstacles (fallen branches, forgotten
objects, etc.)
Stop the robot safely (see “Robot Safety Stop”)
Remove the obstacle and restart the robot (see
“Start up - Automatic mode”)
Electric motor failure
Have the motor replaced or repaired by your
nearest authorised service centre
Grass too high
Increase the cutting height (see “Adjustment of
cutting height”)
Carry out a preliminary cutting of the area with a
normal lawnmower
The robot does not position
itself correctly inside the
charging station
Incorrect positioning of the perimeter
wire or power cord of the charging
station
Check the connection of the charging station
(see “Installation of charging station and power
supply unit”)
Collapsing of ground next to the
charging station
Position the charging station on a at and stable
surface (see “Planning of system installation”)
The robot does not behave
correctly around the
owerbeds
Perimeter wire laid incorrectly
Reposition the perimeter wire correctly (counter-
clockwise direction) (see “Installation of
perimeter wire”)
The robot works at the wrong
time
Clock was set incorrectly
Reset the clock of the robot (see “Programming
Mode”)
Working time was set incorrectly
Reset the working time (see “Programming
Mode”)
The robot does not execute
quick re-entry
Quick re-entry not setup correctly
Check the exact layout of the quick re-entry
(see “Layout of the robot’s quick re-entry to the
charging station”)
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L250 Deluxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L250 Deluxe in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L250 Deluxe

Ambrogio L250 Deluxe User Manual - German - 42 pages

Ambrogio L250 Deluxe User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info