806231
14
Zoom out
Zoom in
Previous page
1/22
Next page
18
Prepare fi lm
Please note that welding seams, which are applied with the
vacuum sealer do not cross. The open sides to be sealed
must be located opposite each other and not adjacent. Do not cut
off welded seams that are already on the fi lm.
1. First, prepare the required number of bags.
For this, unroll a piece of lm from the lm roll and cut it with
appropriate scissors or cutting bar 7 to the required length.
Please note that due to the sealing, the usable length of
the bag will be slightly shorter than the piece that you
have cut off of the fi lm roll.
2. To use the cutting bar 7, fl ip it open as far as noticeable resist-
ance, see Fig. B.
If you move the cutting bar beyond the resistance, it will
be removed from the device. To reattach it to the device,
see Fig. D.
3. Position the fi lm over the vacuum sealer.
4. Snap shut the cutting bar, let it lock in on the right and slide the
blade button 1 to the left or right, if necessary, into the limit
stop.
If the blade button is not outside of the area of the lm,
no cutting will occur during the cutting process.
5. Press the blade head 1 slightly downwards onto the lm,
while sliding it onto the opposite side.
Use
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambiano GT-VBS-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambiano GT-VBS-01 in the language / languages: English as an attachment in your email.

The manual is 0.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambiano GT-VBS-01

Ambiano GT-VBS-01 User Manual - German - 22 pages

Ambiano GT-VBS-01 User Manual - French, Italian - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info