806171
16
Zoom out
Zoom in
Previous page
1/40
Next page
Troubleshooting
USA
AFTER SALES SUPPORT
16
USA
1-866-558-8096
service@801service.net
Sharpening flat-headed screwdrivers
You cannot grind star-headed screwdrivers or similar with this
sharpener.
1. Applying only slight pressure, run the screwdriver into the sharpening
slots 1 from the top so that it is centric with the grindstone (see fig. D).
2. Take the screwdriver out and check the edge condition. If necessary, correct
the edge condition if only one side has been sharpened.
3. Turn the screwdriver over or use the second sharpening slot 2 to grind
the other side.
4. You can use the coarse sharpening slots 10 and 11 in the same manner if
the screwdriver is very dull or already has notches. You can make slight cor-
rections to the edge condition with the two fine sharpening slots.
5. Then slowly and carefully run the screwdriver into the grinding opening for
screwdrivers 5 in a level position to grind the tip straight.
After sharpening
1. Turn the sharpener 9 off with the On/Off switch.
2. Pull the power plug.
3. Push the wind-up button for the power cable 4 – the power cord will be
drawn into the housing 8.
4. With the sharpener in one hand, tap it with your other hand so that any resi-
due falls out of the sharpening slots.
5. Wipe the sharpener and the work surface off with a damp cloth.
Troubleshooting
Fault Possible cause Solution
The sharpener
does not turn
on.
The power plug is not properly
connected to a socket.
Properly connect the
sharpener to the grid.
The socket is not functional. Insert the power plug in
another socket.
The On/Off switch is set to 0. Set the On/Off switch to I.
An unusual odor
is produced
during use.
This is not unusual when using
the device for the first time.
Make sure the room is
adequately ventilated.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambiano GT-AS-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambiano GT-AS-01 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambiano GT-AS-01

Ambiano GT-AS-01 User Manual - German, French, Italian - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info