342866
7
Zoom out
Zoom in
Previous page
1/364
Next page
Installation
Leveling
To protect personal property and refrigerator from
damage, observe the following:
Protect vinyl or other flooring with cardboard, rugs, or
other protective material.
Do not use power tools when performing leveling
procedure.
CAUTION
4. Using a carpenter’s level, make sure front of
refrigerator is
1
4 (6 mm) or approximately
1
2 bubble
higher than back of refrigerator and that the
refrigerator is level from side to side.
5. Turn stabilizing legs
(C) clockwise until
firmly against floor.
6. Turn adjustment screws
(A) counterclockwise
to allow the full weight
of the refrigerator to
rest on the stabilizing
legs.
7. If required, correct
rocking of refrigerator
by turning rear
adjustment screw
clockwise to raise
rocking corner. If doors
are uneven, do the following:
Determine which door needs to be raised.
Turn front roller adjustment screw (A) clockwise
to raise front corner of door.
If one refrigerator door has reached the limit of
its adjustment range and doors are still not level,
raise or lower the opposite door by turning roller
adjustment screw
clockwise or counterclockwise.
Check with level to verify 6 mm tilt to the back
for proper door closure.
If refrigerator is aligned and stable, replace toe
grille.
6
Materials Needed:
3
8 hex head driver
• Carpenter’s level.
1. Remove toe grille.
Grasp firmly and pull
outward to unclip.
2. Using hex head driver, turn
the front adjustment screws
(A) on each side to
raise or lower the front of the refrigerator (see
illustration below).
3. Select models also have rear adjustment screws
(B). Using the hex head driver, turn each of these
adjustment screws (B) to raise or lower the rear of
the refrigerator.
Notes:
Complete any required water supply connection
before leveling.
Some models only have adjustment screws
(A).
CC
A
B
A
B
Align the toe grille mounting clips with the lower
cabinet slots.
Push the toe grille firmly until it snaps into place.
Roller Adjustment Screw
Stabilizing
Leg
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amana as 2628 hekb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amana as 2628 hekb in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 71,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info