541735
4
Zoom out
Zoom in
Previous page
1/28
Next page
4
FEATURES
1
NEW
1
NEW
1
NEW
1
NEW
1
NEW
AC100V ~ 50/60Hz
110 -120V ~ 50/60Hz
220 -240V ~ 50/60Hz
RATED POWER CONSUMPTION:600W
FUSE: 100V
110-120V
220-240V
T8 AL AC250V
T8 AL AC250V
T4 AL AC250V
25
26
27 28
29
30
31
32
3333
3434
35
36
37
38
39
3
12
4
4
5
6
8
9
10
11
12
13
15
16 16 16
16
16
17
17
18
19 19 20
20
21
22
23
24
21
18
11
12
13
15
11
12
13
15
11
12
11
12
13
15 15
14
10 10 10 10
9999
8
88
8
5
6
5
6
5
6
5
7
7
1. POWER IN Use the included power cable to connect the mixer to a power outlet. While the power is
switched off, plug the power cable into the mixer first, then plug the power cable into a power outlet.
2. VOLTAGE SELECTOR – This 2-position switch sets the AC input voltage for the speaker. The switch
should already be set to the correct voltage for your location. (US users should set this switch to "100-
120V" whereas UK and most European users will need to set this to "220-240V.")
3. POWER SWITCH – Turns the mixer on and off. Turn on the mixer after all input devices have been
connected. Make sure the MASTER LEVEL knob is set to "zero" before turning it on.
4. SPEAKER OUTPUTS – Connect the speakers to these outputs using 1/4" cables.
5. MIC INPUT (XLR) – Connect a microphone to these inputs with an XLR cable.
6. LINE INPUT (1/4") – Connect line-level devices to these inputs with 1/4" TRS cables.
7. LINE INPUT (1/4") – Connect line-level devices to these inputs with 1/4" TS cables.
8. HI EQ (TREBLE) – Adjusts the high (treble) frequencies of the channel.
9. MID EQ (MID) – Adjusts the mid-range frequencies of the channel.
10. LOW EQ (BASS) – Adjusts the low (bass) frequencies of the channel.
11. AUX SEND 1 – Adjusts the channel audio (pre-fader) level that is sent to the AUX SEND OUTPUT 1
and CTRL ROOM OUT.
12. AUX SEND 2 – Adjusts the channel audio (post-EQ) level that is sent to the mixer's internal effects
processor or AUX SEND 2. Turn this up for the channels that you want effects applied to. You can use
this to apply effects to individual channels. (If you have an external device connected to the AUX SEND
OUTPUT 2 jack, the internal effects processor will be bypassed.)
13. PAN – Adjusts the (mono) channel's position in the stereo field.
14. BALANCE (CH 5/6) – Adjusts the balance between Channels 5 and 6.
15. CHANNEL LEVEL – Adjusts the audio level on the channel.
16. -20 dB SWITCH – When this button is engaged, the audio of that channel will be attenuated by 20 dB.
This can help increase the headroom and reduce distortion due to an overly loud input signal that
peaks frequently.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional MIXPACK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional MIXPACK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info