541735
27
Zoom out
Zoom in
Previous page
1/28
Next page
27
TECHNICAL SPECIFICATIONS
MIXER SECTION:
FREQUENCY RESPONSE: 10 Hz – 55 KHz (+ 3 dB)
IMPEDANCE: 1.4 K (mic input)
2.5 K (channel insert return)
> 10 K (all other inputs)
1 K (tape out)
120 (all other outputs)
SNR: > 94 dB
THD+N: 0.04% at +4 dBu, 1 KHz (mic, line, and stereo input channels)
GAIN: 35 dB (mic input)
15 dB (line input)
EQUALIZATION: High shelving: + 15 dB @ 12 KHz
Mid-bell: + 15 dB @ 2.5 KHz
Low shelving: + 15 dB @ 80 Hz
DSP SECTION: 24-bit A/D and D/A converters
24-bit DSP resolution
Effects (16 presets): Reverbs (Hall, Room, Vocal, Plate), Stereo Delay,
Reverb + Delay, Reverb + Chorus
Controls: 16-position selector, clip LED, mute switch with LED indicator
NOISE (bus noise): Fader 0 dB, channels muted: -85dB (ref:+4dBu)
Fader 0 dB, all input channels set to Unity gain: -81dBr (ref:+4dBu)
MAX OUTPUT: Balanced outputs: 27dBu
Aux sends: 22dBu
SPEAKER SECTION:
SYSTEM TYPE: 3-way powered system bi-amp plus passive crossover into satellite
FREQUENCY RESPONSE: 55 Hz – 20 KHz at -10 dB
SPHERICAL HORN COVERAGE: 80° H x 80° V
POWER: Low Output: 150 W RMS Class AB
Mid-High Output: 75 W + 75 W RMS Class AB
Peak: 600 W Peak
MAX SPL @ 1m: 116.5 dB Continuous, 119.5 Peak (calculated)
SPEAKER SPECIFICATION: 12" (318mm) low-frequency driver; 2" (51mm) voice coil;
2 x 6.5" (165mm) mid-frequency driver; 1" (25mm) voice coil
1" (25mm) high-frequency compression driver; 1" (25mm) voice coil
CROSSOVER FREQUENCIES: Active: 125 Hz at 12 dB/Oct.
Passive: 3 KHz at 12 dB/Oct. with Electronic Dynamic Protections
AMPLIFIER SECTION:
IMPEDANCE: Low: 4
Mid/High: 8
PROTECTIONS: Soft start, short circuit, DC output voltage, thermal,
subsonic filter (30 Hz), 24 dB/Oct., limiter/compressor
DIMENSIONS (W x D x H): 41.2" x 27.6" x 27.6" (1060mm x 700mm x 700mm) (compact)
WEIGHT: 94.8 lbs (43 kg)
Inrush current at initial switch-on: 6.85A
Inrush current after power supply interruption: 8.64A
* Specifications are subject to change without notice.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional MIXPACK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional MIXPACK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info