661060
5
Zoom out
Zoom in
Previous page
1/16
Next page
ALPINE MRV-M1200 68-29530Z91-A (EN/FR/ES)
3-EN
EN
FR
ES
INSTALLATION
Due to the high power output of the MRV-M1200
considerable heat is produced when the amplifier
is in operation. For this reason, the amplifier should
be mounted in a location which will allow for free
circulation of air, such as inside the trunk. For
alternate installation locations, please contact your
authorized Alpine dealer.
1. Using the amplifier as a template, mark the four
screw locations.
2. Make sure there are no objects behind the
surface that may become damaged during
drilling.
3. Drill the screw holes.
4. Position the MRV-M1200 over the screw holes,
and secure with four self-tapping screws.
Self-Tapping Screws (M4 × 20)
Holes
Holes
Chassis
Ground Lead
NOTE:
To securely connect the ground lead, use an
already installed screw on a metal part of the
vehicle (marked ( )) or a clean, bare metal spot
on the vehicles chassis. Be sure this is a good
ground by checking continuity to the battery (–)
terminal. Connect all equipment to the same
ground point while keeping wire length as short
as possible. These procedures will help eliminate
noise.
5. Attach the Remote Bass Control Unit.
Attach the Remote Bass Control Unit under the
instrument panel or side of the front console,
etc., by using the four supplied Self-Tapping
Screws.
Self-Tapping Screws (M4 × 12)
CAUTION
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS. Cables or wiring that
obstruct or hang up on places such as the steering
wheel, gear lever, brake pedals, etc. can be
extremely hazardous.
ATTACHING THE
TERMINAL COVERS
Attach the terminal covers (included) after
connections and confirmation of correct operation.
Attaching the terminal covers will improve the
appearance of the unit.
How to attach the terminal covers:
Attach the terminal covers to the main unit.
Terminal Covers
CAUTION
Do not lift or carry the unit by the attached
terminal covers.
und to
ing
s in
pment
y, and it
ordance
nit in
e is
anty,
which
d States
r dealer
ge.
..............4
......1 SET
..............1
..............1
......1 SET
..............1
..............4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine MRV-M1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine MRV-M1200 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info